AN2381 datasheet(28/47 Pages) STMICROELECTRONICS

28 / 47 page

Registers Description

AN2381

28/47

In Big Endian Mode (bit BLE in CTRL_REG2 set to ‘1’) the content of this register becomes

the Most Significant part of acceleration data and depends by bit DAS in CTRL_REG2

5.3.6

OUTY_H (2Bh)

Y-axis output register, most significant bits.

When reading the register in “12 bit right justified” mode (bit DAS in A_IF_CTRL2 reg set to

0) the most significant bits (7:4) are replaced with YD11 (i.e. YD15-YD12=YD11, YD11,

YD11, YD11).

In Big Endian Mode (bit BLE in CTRL_REG2 set to ‘1’) the content of this register becomes

the Less Significant part of acceleration data.

5.3.7

OUTZ_L (2Ch)

Z-axis output register, less significant bits.

In Big Endian Mode (bit BLE in CTRL_REG2 set to ‘1’) the content of this register becomes

the Most Significant part of acceleration data and depends by bit DAS in CTRL_REG2

5.3.8

OUTZ_H (2Dh)

Z-axis output register, most significant bits.

When reading the register in “12 bit right justified” mode (bit DAS in A_IF_CTRL2 reg set to

0) the most significant bits (7:4) are replaced with ZD11 (i.e. ZD15-ZD12=ZD11, ZD11,

ZD11, ZD11).

In Big Endian Mode (bit BLE in CTRL_REG2 set to ‘1’) the content of this register becomes

the Less Significant part of acceleration data.

YD15

YD14

YD13

YD12

YD11

YD10

YD9

YD8

YD15, YD8

Y axis acceleration data MSb (bit BLE in CTRL_REG2 register set to ‘0’)

ZD7

ZD6

ZD5

ZD4

ZD3

ZD2

ZD1

ZD0

ZD11, ZD8

Z axis acceleration data LSb (bit BLE in CTRL_REG2 register set to ‘0’)

ZD15

ZD14

ZD13

ZD12

ZD11

ZD10

ZD9

ZD8

ZD15, ZD8

Z axis acceleration data MSb (bit BLE in CTRL_REG2 register set to ‘0’)

AN2381 Datasheet(PDF) 28 Page - STMicroelectronics

AN2381 Datasheet(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Datasheet Download

Link URL