L6751C datasheet(45/57 Pages) STMICROELECTRONICS

45 / 57 page

DocID025037 Rev 1

45/57

L6751C

System control loop compensation

The control system can be modeled with an equivalent single-phase converter with the only

difference being the equivalent inductor L/N (where each phase has an L inductor and N is

the number of the configured phases), see Figure 15.

Figure 15. Equivalent control loop

The control loop gain results (obtained opening the loop after the COMP pin):

Equation 21

where:



RLL is the equivalent output resistance determined by the droop function (voltage

positioning)



ZP(s) is the impedance resulting from the parallel of the output capacitor (and its ESR)

and the applied load RO



ZF(s) is the compensation network impedance



ZL(s) is the equivalent inductor impedance



A(s) is the error amplifier gain



is the PWM transfer function.

The control loop gain is designed in order to obtain a high DC gain to minimize static error

and to cross the 0 dB axes with a constant -20 dB/dec slope with the desired crossover

frequency

T. Neglecting the effect of ZF(s), the transfer function has one zero and two

poles; both poles are fixed once the output filter is designed (LC filter resonance

LC) and

the zero (

ESR) is fixed by ESR and the droop resistance.

Ref

COMP

RFB

PWM

L/N

ESR

d VCOMP

VOUT

ZF(s)

ZFB(s)

FBR

RGND

AM14821v1

GLOOP s



PWM ZF s

 R

ZP s





ZP s

 Z

L s





ZF s



--------------



------------



 R



-------------------------------------------------------------------------------------------------------------------

–

PWM

------

VIN

V

OSC

-------------------



L6751C Datasheet(PDF) 45 Page - STMicroelectronics

L6751C Datasheet(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Datasheet Download

Link URL