| Electronic Components Datasheet Search |
|
845GL Datasheet(PDF) 101 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
845GL Datasheet(HTML) 101 Page - Intel Corporation |
|
101 / 193 page ![]() Intel® 82845G/82845GL/82845GV GMCH Datasheet 101 Register Description 3.5.3.21 PMCAP—Power Management Capabilities Register (Device 2) Address Offset: D2h −D3h Default Value: 0021h Access: RO Size: 16 bits 3.5.3.22 PMCS—Power Management Control/Status Register (Device 2) Address Offset: D4h −D5h Default Value: 0000h Access: R/W, RO Size: 16 bits Bit Description 15:11 PME Support. Hardwired to 0. This field indicates the power states in which the IGD may assert PME#. The IGD does not assert the PME# signal. 10 D2. Hardwired to 0. The D2 power management state is not supported. 9 D1. Hardwired to 0. The D1 power management state is not supported. 8:6 Reserved. Read as zeros. 5 Device Specific Initialization (DSI). Hardwired to 1 to indicate that special initialization of the IGD is required before generic class device driver is to use it. 4 Auxiliary Power Source. Hardwired to 0. 3 PME Clock. Hardwired to 0. The IGD does not support PME# generation. 2:0 Version. Hardwired to 001b to indicate there are 4 bytes of power management registers implemented. Bit Description 15 PME_Status—RO. Hardwired to 0. The IGD does not support PME# generation from D3 (cold). 14:13 Data Scale (Reserved)—RO. Hardwired to 0. The IGD does not support data register. 12:9 Data_Select (Reserved)—RO. Hardwired to 0. The IGD does not support data register. 8 PME_En—RO. Hardwired to 0. PME# assertion from D3 (cold) is disabled. 7:2 Reserved. Always returns 0 when read, write operations have no effect. 1:0 PowerState—R/W. This field indicates the current power state of the IGD and can be used to set the IGD into a new power state. If software attempts to write an unsupported state to this field, the write operation must complete normally on the bus, but the data is discarded and no state change occurs. 00 = D0 (Default) 01 = D1 Not Supported– Writes will be blocked and will return the previous value. 10 = D2 Not Supported– Writes will be blocked and will return the previous value. 11 = D3 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |