WM8581 datasheet(45/94 Pages) WOLFSON

45 / 94 page

Product Preview

WM8581

PP Rev 1.0 March 2006

SECONDARY AUDIO INTERFACES (SAIF RX & SAIF TX)

The Transmit and Receive sides of the Secondary Audio Interface share a common LRCLK and a

common BCLK. These can be supplied externally (slave mode) or they can be generated internally

by the WM8581 (master mode). The master mode LRCLK/BCLK are created by the Master Mode

Clock Gen module. The control of this module is described on page 34. The clock supplied to this

module can be ADCMCLK, PLLACLK, PLLBCLK, or MCLK and is selected using the

SAIFMS_CLKSEL register. If the digital routing has been configured such that the SAIF Transmitter

is sourcing the S/PDIF Receiver, then PLLACLK is automatically selected, and it is recommended

that the interface operate in master mode. However, if the SAIF Transmitter sources something other

than the S/PDIF Receiver, and the S/PDIF Receiver is powered up, the PLLACLK and PLLBCLK are

invalid for SAIF operation, so the choice is limited to ADCMCLK (default) or MCLK.

Figure 30 SAIF Clock Selection

ADDRESS

BIT

LABEL

DEFAULT

DESCRIPTION

R11

7:6

SAIFMS_

CLKSEL

SAIF Master Mode clock source

00 = ADCMCLK pin

01 = PLLACLK

10 = PLLBCLK

11 = MCLK pin

Table 36 SAIF Master Mode Clock Control

WM8581 Datasheet(PDF) 45 Page - Wolfson Microelectronics plc