| Electronic Components Datasheet Search |
|
MPC8280 Datasheet(PDF) 980 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8280 Datasheet(HTML) 980 Page - Freescale Semiconductor, Inc |
|
980 / 1386 page ![]() ATM Controller and AAL0, AAL1, and AAL5 MPC8280 PowerQUICC II Family Reference Manual, Rev. 1 31-20 Freescale Semiconductor (source ER). A congested switch along the network may decrease ER to the exact rate it can support. The destination receives forward RM cells and returns them to the source as backward RM cells. The MPC8280 implements source behavior by adjusting the rate according to each returning backward RM cell’s ER. Explicit rate feedback has several advantages over binary feedback (EFCI). Explicit rate feedback allows immediate source rate adaptation, eliminating rate oscillation caused by incremental rate changes. Using the information in RM cells, the network can allocate bandwidth evenly among active ABR channels. 31.5.1 The ABR Model Figure 31-10 shows the MPC8280’s ABR model. Figure 31-10. MPC8280’s ABR Basic Model The MPC8280 ABR flow control implements both source and destination behavior. The MPC8280’s ABR flowchart is described in Section 31.5.1.3, “ABR Flowcharts.” 31.5.1.1 ABR Flow Control Source End-System Behavior The MPC8280’s implementation of ABR flow control for end-system sources is described in the following steps: 1. An ABR channel’s allowed cell rate (ACR) lies between the minimum cell rate (MCR) and the peak cell rate (PCR). 2. ACR is initialized to the initial cell rate (ICR). 3. An F-RM (Forward-RM) cell is sent for every Nrm data cell sent. If more than Mrm cells are sent and the time elapsed since the last F-RM exceeds Trm, an F-RM cell is sent. 4. When sending an F-RM cell, the current ACR is written in the CCR (current cell rate) field of the RM cell. 5. When B-RM (backward-RM) cell is received with CI = 1 (congestion indication), ACR is reduced by ACR × RDF (rate decrease factor). After the reduction, the new ACR is determined first by letting ACRtemp be the min of (ACR, ER), and then taking the max of (ACRtemp, MCR). Source Behavior Destination Behavior Nrm Data Cells F-RM Cell B-RM Cell Update Rate CCR,ER ER, CI, NI F-RM Cell B-RM Cell Set CI, NI Turn-around Reduce ER |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |