LAN9313 datasheet(32/398 Pages) SMSC

32 / 398 page

Three Port 10/100 Managed Ethernet Switch with MII

Datasheet

Revision 1.2 (04-08-08)

SMSC LAN9313/LAN9313i

DATASHEET

Note 3.3

When used as an output, the pin(s) input buffer(s) and pull-down(s) are disabled.

MII Receive

Data Valid

RXDV

IS/O8

(PD)

Note 3.3

MII Receive Data Valid: Indicates valid data on

RXD[3:0].

In MAC mode, this signal is input from an

external PHY.

In PHY mode, this signal is output to an external

MAC. See Note 3.3.

MII Receive

Clock

RXCLK

IS/O12

(PD)

Note 3.3

MII Receive Clock:

In MAC mode, this is the receiver clock input from

an external PHY.

In PHY mode, this is the receiver clock output to

an external MAC. See Note 3.3.

MII

Management

Data

MDIO

IS/O8

Note 3.5

MII Management Data:

In SMI/MII slave management modes, this signal

is the management data to/from an external

master.

In MII master management modes, this signal is

the management data to/from an external PHY.

See Note 3.5

MII

Management

Clock

MDC

IS/O8

Note 3.6

MII Management Clock:

In SMI/MII slave management modes, this is the

management clock input from an external master.

In MII master management modes, this is the

management clock output to an external PHY.

See Note 3.6.

MII Port

Duplex

MII_DUPLEX

(PU)

Note 3.7

MII Port Duplex: This pin sets the duplex of the

MII port. Its’ value can be changed at any time (live

value) and can be overridden by disabling the

Auto-Negotiation (VPHY_AN) bit in the Virtual PHY

Basic Control Register (VPHY_BASIC_CTRL) of

the Virtual PHY.

In MAC mode, this signal is typically tied to the

duplex indication from the external PHY.

In PHY mode, this signal is typically tied high or low

as needed.

The polarity of this signal depends upon the

duplex_pol_strap_mii strap. If duplex_pol_strap_mii

is 0, a MII_DULPEX value of 0 indicates full duplex,

and 1 indicates half duplex. If duplex_pol_strap_mii

is 1, a MII_DULPEX value of 1 indicates full duplex,

and 0 indicates half duplex.

Table 3.4 LAN Port 0(External MII) Pins (continued)

NAME

SYMBOL

BUFFER

TYPE

DESCRIPTION

LAN9313 Datasheet(PDF) 32 Page - SMSC Corporation

LAN9313 Datasheet(HTML) 32 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL