DSPIC33FJ06GS201TESLASHMM datasheet(212/346 Pages) MICROCHIP

212 / 346 page

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

DS70318D-page 210

Preliminary

R/W-0

PENH

PENL

POLH

POLL

PMOD<1:0>(1)

OVRENH

OVRENL

bit 15

bit 8

R/W-0

OVRDAT<1:0>

FLTDAT<1:0>

CLDAT<1:0>

SWAP

OSYNC

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 15

PENH:

PWMH Output Pin Ownership bit

= PWM module controls PWMxH pin

= GPIO module controls PWMxH pin

bit 14

PENL:

PWML Output Pin Ownership bit

= PWM module controls PWMxL pin

= GPIO module controls PWMxL pin

bit 13

POLH:

PWMH Output Pin Polarity bit

= PWMxH pin is active-low

= PWMxH pin is active-high

bit 12

POLL:

PWML Output Pin Polarity bit

= PWMxL pin is active-low

= PWMxL pin is active-high

bit 11-10

PMOD<1:0>:

PWM # I/O Pin Mode bits(1)

= PWM I/O pin pair is in the Complementary Output mode

= PWM I/O pin pair is in the Redundant Output mode

= PWM I/O pin pair is in the Push-Pull Output mode

= PWM I/O pin pair is in the True Independent Output mode

bit 9

OVRENH:

Override Enable for PWMxH Pin bit

= OVRDAT<1> provides data for output on PWMxH pin

0 = PWM generator provides data for PWMxH pin

bit 8

OVRENL:

Override Enable for PWMxL Pin bit

= OVRDAT<0> provides data for output on PWMxL pin

= PWM generator provides data for PWMxL pin

bit 7-6

OVRDAT<1:0>:

Data for PWMxH and PWMxL Pins if Override is Enabled bits

If OVERENH = 1 then OVRDAT<1> provides data for PWMxH.

If OVERENL = 1 then OVRDAT<0> provides data for PWMxL.

bit 5-4

FLTDAT<1:0>:

Data for PWMxH and PWMxL Pins if FLTMOD is Enabled bits

FCLCONx<IFLTMOD> = 0: Normal Fault mode:

If Fault active, then FLTDAT<1> provides data for PWMxH.

If Fault active, then FLTDAT<0> provides data for PWMxL.

FCLCONx<IFLTMOD> = 1: Independent Fault mode:

If current-limit active, then FLTDAT<1> provides data for PWMxH.

If Fault active, then FLTDAT<0> provides data for PWMxL.

Note 1:

These bits should be changed only when PTEN = 0. Changing the clock selection during operation will

yield unpredictable results.

DSPIC33FJ06GS201TE/MM Datasheet(PDF) 212 Page - Microchip Technology

DSPIC33FJ06GS201TE/MM Datasheet(HTML) 212 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL