AS3515_08 datasheet(48/67 Pages) AMSCO

48 / 67 page

AS3515 V15

austriamicrosystems

Data Sheet, Confidential

www.austriamicrosystems.com

Revision 3.1

- 66

6.18 10-Bit ADC

6.18.1 General

This general purpose ADC can be used for measuring several voltages and currents to perform functions like battery monitor, temperature

supervision, button press detection, etc..

6.18.2 Input Sources

Table 50 ADC10 Input Sources

Nr.

Source

Range

LSB

Description

BVDD

5.120V

5mV

check battery voltage of 4V LiIo accumulator

RTCSUP

5.120V

5mV

check RTC backup battery voltage

UVDD

5.120V

5mV

check USB host voltage

CHG_IN

5.120V

5mV

check charger input voltage

CVDD

2.560V

2.5mV

check charge pump output voltage

BatTemp

2.560V

2.5mV

check battery charging temperature

MicSup1

2.560V

2.5mV

check voltage on MicSup1 for remote control or external voltage

measurement

MicSup2

2.560V

2.5mV

check voltage on MicSup2 for remote control or external voltage

measurement

VBE1

1.024

1mV

measuring junction temperature @ 2uA

VBE2

1.024

1mV

measuring junction temperature @ 1uA

I_MicSup1

2.048mA typ. 2.0uA

check current of MicSup1 for remote control detection

I_MicSup2

2.048mA typ. 2.0uA

check current of MicSup2 for remote control detection

VB1V

2.560V

2.5mV

check single cell battery voltage

13..15

Reserved

1.024V

1mV

for testing purpose only

BVDD, RTCSUP, UVDD, CHG_IN

These sources are fed into an 1/5 voltage divider (180k

Ω typ.) and further amplified by 2.5.

CVDD, BatTemp, MicSup1, MicSup2

These sources are fed directly to the ADC input multiplexer.

VBE1, VBE2

These inputs are first amplified by 2.5 and than fed to the ADC input multiplexer.

I_MicSup1, I_MicSup2

The measurement of the microphone supply LDOs is not very accurate, as the current-voltage conversion is only done by a single resistor

which shows wide process and temperature variations. These measurements should be only used for remote function detection.

VB1V

This source is divided by 2.5 with a voltage divider (180k

Ω typ.) and than amplified by 2.5. This has to be done, as VB1V can represent

voltages up to 3.6V. Please note, that the maximum measurement rage will be still 2.560V

6.18.3 Reference

AVDD=2.9V is used as reference to the ADC. AVDD is trimmed to +/-20mV with over all precision of +/-29mV. So the absolute accuracy is

+/-1%.

AS3515 Datasheet(PDF) 48 Page - ams AG

AS3515 Datasheet(HTML) 48 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL