EMC2103 datasheet(83/85 Pages) MICROCHIP

83 / 85 page

RPM-Based Fan Controller with Hardware Thermal Shutdown

Datasheet

 2013 Microchip Technology Inc.

DS0005250A-page 83

Datasheet Revision History

Revision History

REVISION LEVEL & DATE

SECTION/FIGURE/ENTRY

CORRECTION

REV A

Replaces the previous SMSC version Rev. 0.93

Rev. 0.93 (01-08-10)

Table A.6, "Fan Speed

Control Table Example #2"

Recalculated RPM values using Equation 3 to

correct math errors.

Rev. 0.92 (5-17-09)

Section Chapter 2, "Pin

Layout"

Added app note: For the 5V tolerant pins that have

a pull-up resistor (SMCLK, SMDATA, ALERT, and

SYS_SHDN), the voltage difference between VDD

and the 5V tolerant pad must never be more than

3.6V.

Table 3.1, "Absolute

Maximum Ratings"

Updated voltage limits for 5V tolerant pins with

pull-up resistors.

Table 3.2, "Electrical

Specifications"

Qualified leakage current (pull-up voltage < 3.6V)

Rev. 0.91 (04-09-09)

Appendix B "RPM to

Tachometer Count Look Up

Tables"

Section 6.31, "TACH

Reading Register"

Removed

Added reference to AN17.4 “RPM to TACH Counts

Conversion” which includes more information.

Rev. 0.89 (07-02-08)

Table 5.1, "SHDN_SEL Pin

Decode"

Added note for EEPROM loading for EMC2103-4

Section 4.9, "Programming

from EEPROM"

Added section for EEPROM loading description

Table 3.4, "EEPROM Loader

Electrical Specifications"

Added specifications for EEPROM loading

description

EMC2103 Datasheet(PDF) 83 Page - Microchip Technology

EMC2103 Datasheet(HTML) 83 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

Datasheet Download

Link URL