| Electronic Components Datasheet Search |
|
SC3200 Datasheet(PDF) 86 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
SC3200 Datasheet(HTML) 86 Page - Advanced Micro Devices |
|
86 / 447 page ![]() 86 AMD Geode™ SC3200 Processor Data Book Signal Definitions Revision 5.1 3.4.20 Power, Ground and No Connections1 Signal Name Ball No. Type Description EBGA TEPBGA AVSSPLL2 R3 C16 GND Analog PLL2 Ground Connection. AVSSPLL3 E28 AK3 GND Analog PLL3 Ground Connection. VPLL2 R1 A17 PWR 3.3V PLL2 Analog Power Connection. Low noise power for PLL2 and PLL5. VPLL3 C31 AJ4 PWR 3.3V PLL3 Analog Power Connection. Low noise power for PLL3, PLL4, and PLL6. AVCCUSB AF4 D27 PWR 3.3V Analog USB Power Connection. Low noise power. AVSSUSB AG1 C27 GND Analog USB Ground Connection. VBAT D30 AL3 PWR Battery. Provides battery back-up to the RTC and ACPI registers, when VSB is lower than the minimum value (see Table 9-3 on page 370). The ball is con- nected to the internal logic through a series resistor for UL protection. If battery backup is not desired, connect VBAT to VSS. VSB F29 AL5 PWR 3.3V Standby Power Supply. Provides power to the Real-Time Clock (RTC) and ACPI circuitry while the main power supply is turned off. VSBL H28 AL6 PWR 1.8V Standby Power Supply. Provides power to the internal logic while the main power supply is turned off. This signal requires a 0.1 µF bypass capacitor to V SS. This supply must be present when VSB is present. VCORE SeeTable 3-3 on page 38. (Total of 26) See Table 3-5 on page 54. (Total of 29) PWR 1.8V Core Processor Power Connections. VIO See Table 3-3 on page 38. (Total of 35) See Table 3-5 on page 54. (Total of 46) PWR 3.3V I/O Power Connections. VSS See Table 3-3 on page 38. (Total of 61) See Table 3-5 on page 54. (Total of 96) GND Ground Connections. NC See Table 3-3 on page 38. (Total of 13) See Table 3-5 on page 54. (Total of 13) --- No Connections. These lines should be left discon- nected. Connecting a pull-up/-down resistor or to an active signal could cause unexpected results and pos- sible malfunctions. 1. All power sources except VBAT must be connected, even if the function is not used. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |