SPC563M64L7 datasheet(46/48 Pages) STMICROELECTRONICS

46 / 48 page

Revision history

SPC563Mxx

46/48

Doc ID 13850 Rev 6

08-Jun-2011

Replaced in all document “... Architecture Book E compliant...” with “...

Architecture technology compliant...”

Updated “Introduction”: Added “Document overview” and “Description”

sections.

Made the following changes in the “Description” section:

– Added “Floating Point Unit (FPU)” bullet under “Single issue, 32-bit

Power Architecture technology compliant e200z335 CPU core

complex”.

– Changed “eTPU” to “eTPU2” in the “32-channel second-generation

enhanced time processor unit” sentence.

– Changed the “Available in LQFP100, LQFP144, LQFP176 and

LBGA208” sentence to “Designed for LQFP100, LQFP144, LQFP176,

and LBGA208 packages“.

Replaced all instances of “Microsecond Bus” with “Microsecond

Channel”.

Replaced all instances of “SPC563M54” and “SPC563M60” with

“SPC563M54P”and “SPC563M60P”, respectively.

Changed the “Standby SRAM size” of the SPC563M60P device from

“24” to “32”.

Replaced all instances of “downlink” with “downstream” and “uplink” with

“upstream”.

Made the following changes in the “Flash” section:

Changed “Program page size of 128 bits (four words) to accelerate

programming” to “Program page size of 64 bits (two words)”.

Changed “Erase suspend, program suspend and erase-suspended

program” to “Erase suspend”.

Made editorial changes in the “BAM” section: Updated the conditional

tags in the “Supports serial bootloading...” sentences.

Changed “Shared time bases with the eTPU through the counter buses”

to “Shared time bases with the eTPU2 through the counter buses” in the

“eMIOS” section.

Removed the following sentences from the “eTPU2” section:

“For Monaco 1.5M, the eTPU2 has been further enhanced with these

features:”

“Timebases and channels are run at full system clock speed”

“Programmable channel mode allows customization of channel function”

“More flexibility in requesting DMA and interrupt service”

“Channel flags can be tested”

Added the following sentence in the “eQADC” section under the “Priority

based Queues” bullet: “Streaming mode operation of Queue_0 to

execute some commands several times”.

Changed the following sentences in the “DSPI” section:

“The DSPI can be configured ... that implements ... the Microsecond Bus

protocol” to “The DSPI can be configured ... that supports ... the

Microsecond Channel protocol”.

“The DSPI pins support 5 V logic levels or Low Voltage Differential

Signalling (LVDS) to improve high speed operation.” to “The DSPI ouput

pins support 5 V logic levels or Low Voltage Differential Signalling

(LVDS) according to the Microsecond Channel specification.”

Table 4.

Revision history

Date

Revision

Description

SPC563M64L7 Datasheet(PDF) 46 Page - STMicroelectronics

SPC563M64L7 Datasheet(HTML) 46 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Datasheet Download

Link URL