| Electronic Components Datasheet Search |
|
WM8960CGEFL/V Datasheet(PDF) 22 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
WM8960CGEFL/V Datasheet(HTML) 22 Page - Cirrus Logic |
|
22 / 94 page ![]() WM8960 22 Rev 4.4 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R25 (19h) Power Management (1) 5 AINL 0 Left channel input PGA and boost stage enable 0 = PGA disabled, boost disabled 1 = PGA enabled (if LMIC = 1), boost enabled 4 AINR 0 Right channel input PGA and boost stage enable 0 = PGA disabled, boost disabled 1 = PGA enabled (if LMIC = 1), boost enabled R47 (2Fh) Power Management (3) 5 LMIC 0 Left channel input PGA enable 0 = PGA disabled 1 = PGA enabled (if AINL = 1) 4 RMIC 0 Right channel input PGA enable 0 = PGA disabled 1 = PGA enabled (if AINR = 1) Table 2 Input PGA and Boost Enable Register Settings The input PGAs can be configured as differential inputs, using LINPUT1/LINPUT2 or LINPUT1/LINPUT3, and RINPUT1/RINPUT2 or RINPUT1/RINPUT3. The input impedance to these non-inverting inputs is constant in this configuration. Differential configuration is controlled by LMP2, LMP3, RMP2 and RMP3 as shown in Table 3. When single-ended configuration is selected, the non-inverting input of the PGA is connected to VMID. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R32 (20h) ADCL Input Signal Path 3 LMIC2B 0 Connect Left Input PGA to Left Input Boost mixer 0 = Not connected 1 = Connected 6 LMP2 0 Connect LINPUT2 to non-inverting input of Left Input PGA 0 = LINPUT2 not connected to PGA 1 = LINPUT2 connected to PGA (Constant input impedance) 7 LMP3 0 Connect LINPUT3 to non-inverting input of Left Input PGA 0 = LINPUT3 not connected to PGA 1 = LINPUT3 connected to PGA (Constant input impedance) 8 LMN1 1 Connect LINPUT1 to inverting input of Left Input PGA 0 = LINPUT1 not connected to PGA 1 = LINPUT1 connected to PGA R33 (21h) ADCR Input Signal Path 3 RMIC2B 0 Connect Right Input PGA to Right Input Boost mixer 0 = Not connected 1 = Connected 6 RMP2 0 Connect RINPUT2 to non-inverting input of Right Input PGA 0 = RINPUT2 not connected to PGA 1 = RINPUT2 connected to PGA (Constant input impedance) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |