| Electronic Components Datasheet Search |
|
WM8599SEFT/V Datasheet(PDF) 25 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8599SEFT/V Datasheet(HTML) 25 Page - Wolfson Microelectronics plc |
|
25 / 74 page ![]() Product Preview WM8599 w PP Rev 1.0 January 2007 25 1:0 ADC_ FMT[1:0] 10 ADC Audio Interface Format 00 = Right Justified 01 = Left Justified 10 = I 2S 11 = DSP 3:2 ADC_ WL[1:0] 10 ADC Audio Interface Word Length 00 = 16-bit 01 = 20-bit 10 = 24-bit 11 = 32-bit (not available in Right Justified mode) 4 ADC_BCP 0 ADC BCLK Polarity 0 = ADCBCLK not inverted - data latched on rising edge of BCLK 1 = ADCBCLK inverted - data latched on falling edge of BCLK R13 ADC_CTRL1 0Dh 5 ADC_LRP 0 ADC LRCLK Polarity 0 = ADCLRCLK not inverted 1 = ADCLRCLK inverted Table 11 Audio Interface Control DAC FEATURES The WM8599 includes two 24-bit DACs with shared clocks and independent data inputs. The DACs include digital volume control with zero cross and soft mute, de-emphasis support, and the capability to select the output channels to be stereo or a range of mono options. The DAC is enabled by writing to DAC1_EN and DAC2_EN. Additionally, the DACs can be controlled independently or together. When controlled independently, all settings must be written separately to DAC1 and DAC2. When controlled together, all settings written to DAC1 are automatically written to DAC2. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R2 DAC1_CTRL1 02h 8 DAC1_EN 0 DAC1 Enable 0 = DAC disabled 1 = DAC enabled R7 DAC2_CTRL1 07h 8 DAC2_EN 0 DAC2 Enable 0 = DAC2 disabled 1 = DAC2 enabled Table 12 DAC Enable Control DIGITAL VOLUME CONTROL The WM8599 DACs include independent digital volume control, allowing the digital gain to be adjusted between -100dB and +12dB in 0.5dB steps. All four DAC channels can be controlled independently. Alternatively, global update bits allow the user to write all volume changes before the volume is updated. Volume control includes optional zero cross functionality. When zero cross is enabled, volume changes are not applied until the output level crosses VMID, the DC output level of the WM8599. Zero cross helps to prevent pop and click noise when changing volume settings. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |