| Electronic Components Datasheet Search |
|
PCIMX515CJM6C Datasheet(PDF) 35 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
PCIMX515CJM6C Datasheet(HTML) 35 Page - Freescale Semiconductor, Inc |
|
35 / 184 page ![]() Electrical Characteristics i.MX51 Applications Processors for Consumer and Industrial Products, Rev. 1 Freescale Semiconductor 35 Preliminary—Subject to Change Without Notice Table 29. I2C High-Speed Mode Electrical Parameters for Low/Medium Drive Strength and OVDD = 1.65 V – 1.95 V Parameter Symbol Test Conditions Min Typ Max Unit Output rise time (current-source enabled) and fall time at SCLH (low driver strength) trCL, tfCL with a 3mA external pull-up current source and CL = 100 pF —— 10/74 ns Output rise time (current-source enabled) and fall time at SCLH (medium driver strength) trCL, tfCL with a 3mA external pull-up current source and CL = 100 pF — — 7/14 ns Output fall time at SDAH (low driver strength) tfDA with CL from 10 pF to 100 pF 0 — 17 ns Output fall time at SDAH (medium driver strength) tfDA with CL from 10 pF to 100 pF 0 — 9 ns Output fall time at SDAH (low driver strength) tfDA CL = 400 pF 30 — 67 ns Output fall time at SDAH (medium driver strength) tfDA CL = 400 pF 15 — 34 ns Table 30. Low Voltage I2C I/O Parameters Parameter Symbol Test Condition Min Rise/Fall Typ Max Rise/Fall Unit Output Pad di/dt (Medium drive) tdit — — — 22 mA/ns Output Pad di/dt (Low drive) tdit — — — 11 mA/ns Input Transition Times1 1 Hysteresis mode is recommended for inputs with transition time greater than 25 ns trm — — — 25 ns Table 31. High Voltage I2C I/O Parameters Parameter Symbol Test Condition Min Rise/Fall Typ Max Rise/Fall Unit Output Pad Transition Times (Medium Drive) tr, tf 15 pF 35 pF —— 3/3 6/5 ns Output Pad Transition Times (Low Drive) tr, tf 15 pF 35 pF —— 5/5 9/9 ns Output Pad Slew Rate (Medium Drive) tps 15 pF 35 pF 0/0 0/0 —— V/ns Output Pad Slew Rate (Low Drive) tps 15 pF 35 pF 0/0 0/0 —— V/ns Output Pad di/dt (Medium drive) tdit — — — 36 mA/ns Output Pad di/dt (Low drive) tdit — — — 16 mA/ns Input Transition Times1 1 Hysteresis mode is recommended for inputs with transition time > 25 ns trm — — — 25 ns |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |