| Electronic Components Datasheet Search |
|
AT90SCR100 Datasheet(PDF) 213 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT90SCR100 Datasheet(HTML) 213 Page - ATMEL Corporation |
|
213 / 433 page ![]() 213 TPR0327AY–SMS–30Jan09 AT90SCR100 Once the downstream Resume has been generated, the UHCR.SOFE bit is automatically set by hardware in order to generate SOF immediately after the USB resume. 17.5.9 USB Pipe Reset The firmware can reset a Pipe using the pipe reset register. The configuration of the pipe and the data toggle remains unchanged. Only the bank management and the status bits are reset to their initial values. To completely reset a Pipe, the firmware has to disable and then enable the pipe. 17.5.10 Pipe Data Access In order to read or to write into the Pipe Fifo, the CPU selects the Pipe number with the UPNUM register and performs read or write action on the UPDATX register. 17.5.11 Control Pipe management A Control transaction is composed of 3 phases: •SETUP • Data (IN or OUT) • Status (OUT or IN) The firmware has to change the Token for each phase. The initial data toggle is set for the corresponding token (ONLY for Control Pipe): • SETUP: Data0 • OUT: Data1 • IN: Data1 (expected data toggle) 17.5.12 OUT Pipe management The Pipe must be configured and not frozen first. 17.5.12.1 “Manual” mode The UPINTX.TXOUTI bit is set by hardware when the current bank becomes free. This triggers an interrupt if the UPIENX.TXOUTE bit is set. The UPINTX.FIFOCON bit is set at the same time. The CPU writes into the FIFO and clears the UPINTX.FIFOCON bit to allow the USB controller to send the data. If the OUT Pipe is composed of multiple banks, this also switches to the next data bank. The UPINTX.TXOUTI and UPINTX.FIFOCON bits are automatically updated by hardware regarding the status of the next bank. Host Ready UHCR.SOFE=1 or UHINT.HWUPI=1 UHCR.SOFEN=0 Host Suspend If the firmware decides to switch to suspend mode (clear UHCR.SOFEN) even if a bank is ready to be sent, the USB controller will automatically exit from Suspend mode and the bank will be sent. Note |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |