S5000PAL datasheet(59/112 Pages) INTEL

59 / 112 page

Jumper Block Settings

Intel

® Server Board S5000PAL / S5000XAL TPS

Revision 1.7

Intel order number: D31979-010

Jumper Block Settings

The server board has several 2-pin and 3-pin jumper blocks that can be used to configure, protect, or

recover specific features of the server board. Pin 1 on each jumper block is denoted by an “*” or “▼”.

6.1

Recovery Jumper Blocks

Table 32. Recovery Jumpers (J1D1, J1D2, J1D3)

Jumper Name

Pins

What happens at system reset…

1-2

BMC Firmware Force Update Mode – Disabled (Default)

J1D1: BMC Force

Update

2-3

BMC Firmware Force Update Mode – Enabled

1-2

These pins should have a jumper in place for normal system operation. (Default)

J1D2: Password

Clear

2-3

If these pins are jumpered, administrator and user passwords will be cleared

immediately. These pins should not be jumpered for normal operation.

1-2

These pins should have a jumper in place for normal system operation. (Default)

J1D3: CMOS

Clear

2-3

If these pins are jumpered, the CMOS settings will be cleared immediately. These pins

should not be jumpered for normal operation

TP02080

Password

Reset

J1D2

J1D3

Clear

CMOS

BMC Force

Update Mode

J1D1

Disable

Enable

Figure 17. Recovery Jumper Blocks (J1D1, J1D2, J1D3)

S5000PAL Datasheet(PDF) 59 Page - Intel Corporation

S5000PAL Datasheet(HTML) 59 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL