| Electronic Components Datasheet Search |
|
900844 Datasheet(PDF) 11 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
900844 Datasheet(HTML) 11 Page - Freescale Semiconductor, Inc |
|
11 / 118 page ![]() Analog Integrated Circuit Device Data Freescale Semiconductor 11 900844 ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS Table 2. Maximum Ratings All voltages are with respect to ground, unless otherwise noted. Exceeding these ratings may cause malfunction or permanent damage to the device. The detailed maximum voltage rating per pin can be found in the pin list section. Ratings Symbol Value Unit ELECTRICAL RATINGS Input Voltage - -0.3 to +4.4 V Coin Cell Voltage - -0.3 to +3.6 V ESD Rating, All Pins, Human Body Model (HBM)(4) VESDHBM ±2000 V ESD Rating, All Pins, Charge Device Model (CDM) (4), (5) VESDCDM ±450 V THERMAL RATINGS Ambient Operating Temperature Range TA -40 to +85 °C Operating Junction Temperature Range TJ -30 to +125 °C Storage Temperature Range TST -65 to +150 °C Peak Package Reflow Temperature (2), (3) TPPRT 260 °C POWER RATINGS Hard Mechanical Off There is no Valid VBAT voltage connected to the 900844, BATDET = 0 0 mW Soft Mechanical Off The 900844 has input power from 3.3 V Supply into VBAT. All VRs are programmed “OFF”, BATDET = 1 5.0 mW Power On The 900844 has input power from 3.3 V supply into VBAT. The cold-boot rails are “ON”. V21 = 2.1 V, V15 = 1.5 V, VAON = 1.2 V, VCCPAOAC = 1.05 V, VPMIC = 1.8 V, All VR outputs are set in PFM or APS mode driving purely capacitive loads. BATDET = 1 100 mW Notes 2. Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may cause a malfunction or permanent damage to the device. 3. Freescale's Package Reflow capability meets the Pb-free requirements for JEDEC standard J-STD-020C, for Peak Package Reflow Temperature and Moisture Sensitivity Levels (MSL) 4. ESD testing is performed in accordance with the Human Body Model (HBM) (CZAP = 100 pF, RZAP = 1500 Ω), and the Charge Device Model (CDM), Robotic (CZAP = 4.0 pF). 5. All pins meet 500 V CDM except VCOREREF. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |