TMS320VC5416 datasheet(34/98 Pages) TI

34 / 98 page

www.ti.com

3.11

Enhanced External Parallel Interface (XIO2)

READ

A[22:0]

D[15:0]

CLKOUT

R/W

MSTRB or IOSTRB

PS/DS/IS

Leading

Cycle

Read

Cycle

Trailing

Cycle

TMS320VC5416

Fixed-Point Digital Signal Processor

SPRS095O – MARCH 1999 – REVISED JANUARY 2005

The device external interface has been redesigned to include several improvements, including:

simplification of the bus sequence, more immunity to bus contention when transitioning between read and

write operations, the ability for external memory access to the DMA controller, and optimization of the

power-down modes.

The bus sequence on the device still maintains all of the same interface signals as on previous 54x

devices, but the signal sequence has been simplified. Most external accesses now require 3 cycles

composed of a leading cycle, an active (read or write) cycle, and a trailing cycle. The leading and trailing

cycles provide additional immunity against bus contention when switching between read operations and

write operations. To maintain high-speed read access, a consecutive read mode that performs

single-cycle reads as on previous 54x devices is available.

Figure 3-13 shows the bus sequence for three cases: all I/O reads, memory reads in nonconsecutive

mode, or single memory reads in consecutive mode. The accesses shown in Figure 3-13 always require 3

CLKOUT cycles to complete.

Figure 3-13. Nonconsecutive Memory Read and I/O Read Bus Sequence

Figure 3-14 shows the bus sequence for repeated memory reads in consecutive mode. The accesses

shown in Figure 3-14 require (2 + n) CLKOUT cycles to complete, where n is the number of consecutive

reads performed.

Functional Overview

TMS320VC5416 Datasheet(PDF) 34 Page - Texas Instruments