PIMXRT516SCVJ2A datasheet(35/128 Pages) NXP

35 / 128 page

Electrical characteristics

i.MX RT1170 Crossover Processors Data Sheet for Consumer Products, Rev. 1, 05/2021

NXP Semiconductors

Table 15 shows the typical wakeup time.

Set Point #10

Standby

Suspend

• Lower voltage to 0.8 V with RBB mode for both

SOC and LPSR domains

• System is on STANDBY mode

• CM7 is on SUSPEND mode

• TCM is on retention

• LDO_LPSR_ANA and LDO_LPSR_DIG are

bypassed

• All clock sources are turned off except for 32 kHz

RTC

• All PLLs are power gated

• All peripherals are clock gated, but remain

powered

DCDC_IN

1.2

4.4

VDD_LPSR_IN

22.3

38.3

A

VDD_SNVS_IN

3.7

7.3

A

Total

4.046

14.670

Set Point #15

Standby

Suspend

• Lower voltage to 0.8 V with RBB mode for LPSR

domain

• System is on STANDBY mode

• CM7 is power off

• LMEM is on retention

• DCDC is off, LDO_LPSR_ANA and

LDO_LPSR_DIG are active

• All clock sources are turned off except for 32 kHz

RTC

• All PLLs are power gated

• The WAKEUPMIX domain, MEGAMIX domain,

and DISPLAYMIX domain are power gated

• All peripherals in LPSRMIX domain are clock

gated, but remain powered

DCDC_IN

24.5

A

VDD_LPSR_IN

0.234

1.5

VDD_SNVS_IN

3.7

7.2

A

Total

0.865

5.083

SNVS

• Only SNVS domain is powered

• 32 kHz RTC is alive

• DCDC_IN and VDD_LPSR_IN are power gated

DCDC_IN

A

VDD_LPSR_IN

A

VDD_SNVS_IN

3.7

7.3

A

Total

12.21

24.09

W

1 Code runs in the ITCM; typical values are the average values on typical process wafers.

Table 15. Typical wakeup time1

1 Please refer to Table 13 and Table 14 for Set Point modes definition, and the only difference between Set Point #15 Standby

Suspend mode and Set Point #15 Standby Stop mode is the Suspend mode versus Stop mode on CM4 core.

Description

Typical wakeup time

Unit

From Set Point #1 Standby Suspend to Set Point #1 Overdrive RUN

4.76

From Set Point #0 Standby Suspend to Set Point #1 Overdrive RUN

6.4

From Set Point #5 Standby Suspend to Set Point #1 Overdrive RUN

6.96

From Set Point #10 Standby Suspend to Set Point #1 Overdrive RUN

6.74

From Set Point #15 Standby Stop to Set Point #1 Overdrive RUN

8.07

From SNVS mode to ROM exit

8.54

Table 14. Typical power modes current and power consumption (Single core) (continued)

PIMXRT516SCVJ2A Datasheet(PDF) 35 Page - NXP Semiconductors

PIMXRT516SCVJ2A Datasheet(HTML) 35 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL