ADP5360ACBZ-2-R7 datasheet(45/60 Pages) AD

45 / 60 page

Data Sheet

ADP5360

Rev. 0 | Page 45 of 60

Bit(s)

Bit Name

Access Default

Description

10100 = 4.55 V.

10101 = 4.60 V.

10110 = 4.65 V.

10111 = 4.70 V.

11000 = 4.75 V.

11001 to 11111 = 4.80 V.

[2:1]

HYS_OV_CHG[1:0]

R/W

Battery Overvoltage Protection for Charge Hysteresis. The values of the battery

overvoltage protection can be programmed by using the following values:

00 = 2% of the voltage of the OV_CHG threshold.

01 = 4% of the voltage of the OV_CHG threshold.

10 = 6% of the voltage of the OV_CHG threshold.

11 = 8% of the voltage of the OV_CHG threshold.

DGT_OV_CHG

R/W

0 = 0.5 sec

Battery Overvoltage Protection Deglitch Time. The values of the battery overvoltage

protection deglitch time can be programmed by using the following values:

0 = 0.5 sec.

1 = 1 sec.

Table 39. Battery Protection Charge Overcharge Setting, Address 0x15 Bit Descriptions

Bit(s)

Bit Name

Access Default

Description

[7:5]

OC_CHG[2:0]

R/W

Factory set

Battery Overcurrent Protection for Overdischarge Threshold. The values of the

battery overcurrent protection can be programmed by using the following values:

000 = 25 mA.

001 = 50 mA.

010 = 100 mA.

011 = 150 mA.

100 = 200 mA.

101 = 250 mA.

110 = 300 mA.

111 = 400 mA.

[4:3]

DGT_OC_CHG[1:0]

R/W

01 = 10 ms

Battery Charge Overcurrent Protection DeglitchTime Setting.The values of the battery

charge overcurrent protection can be programmed byusing the following values:

00 = 5 ms.

01 = 10 ms.

10 = 20 ms.

11 = 40 ms.

[2:0]

Reserved

Not applicable

Reserved.

FUEL GAUGE REGISTER BIT DESCRIPTIONS

Table 40. V_SOC_0, Address 0x16 Bit Descriptions

Bit(s)

Bit Name

Access

Default

Description

[7:0]

V_SOC_0[7:0]

R/W

0x7D

Battery Voltage When State of Charge = 0%. The default voltage is 3.5 V.

Battery Voltage (V) = (2.5 + V_SOC_0 × 0.008) (V).

Table 41. V_SOC_5, Address 0x17 Bit Descriptions

Bit(s)

Bit Name

Access

Default

Description

[7:0]

V_SOC_5[7:0]

R/W

0x91

Battery Voltage When State of Charge = 5%. The default voltage is 3.66 V.

Battery voltage (V) = (2.5 + V_SOC_5 × 0.008) (V).

ADP5360ACBZ-2-R7 Datasheet(PDF) 45 Page - Analog Devices

ADP5360ACBZ-2-R7 Datasheet(HTML) 45 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Download

Link URL