STM8L051F3 datasheet(47/96 Pages) STMICROELECTRONICS

47 / 96 page

DS9178 Rev 4

47/96

STM8L051F3

Electrical parameters

IIO

Output current sunk by IR_TIM pin (with high sink LED driver

capability)

Output current sunk by any other I/O and control pin

Output current sourced by any I/Os and control pin

- 25

IINJ(PIN)

Injected current on true open-drain pins (PC0 and PC1)(1)

- 5 / +0

Injected current on five-volt tolerant (FT) pins (PA7 and PE0) (1)

- 5 / +0

Injected current on 3.6 V tolerant (TT) pins (1)

- 5 / +0

Injected current on any other pin (2)

- 5 / +5

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins) (3)

± 25

1. Positive injection is not possible on these I/Os. A negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 13: Current characteristics for maximum allowed input voltage values.

A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 13: Current characteristics for maximum allowed input voltage values.

3. When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values).

Table 14. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to +150

° C

Maximum junction temperature

150

Table 13. Current characteristics (continued)

Symbol

Ratings

Max.

Unit

STM8L051F3 Datasheet(PDF) 47 Page - STMicroelectronics

STM8L051F3 Datasheet(HTML) 47 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96

Datasheet Download

Link URL