TMS320C6421 datasheet(103/227 Pages) TI

103 / 227 page

www.ti.com

TMS320C6421

Fixed-Point Digital Signal Processor

SPRS346B – JANUARY 2007 – REVISED APRIL 2007

Table 3-37. EMIFA Block Major Configuration Choices

MAJOR

PINMUX SELECTION FIELDS

RESULTING PERIPHERALS/PINS

CONFIG.

AEM

RMII

CS3SEL

CS4SEL

CS5SEL

EMIFA(1)

RMII

GPIO

OPTION

58 GP Pins:

000

GP[96:89], GP[54:5]

RMII:

50 GP Pins:

RMRXER, RMRXD[1:0],

000

GP[96:89], GP[54:53],

RMTXD[1:0], REFCLK,

GP[51:34], GP[26:5],

RMCRSDV, RMTXEN

8-bit EMIFA (Async) Pinout

Mode 2:

EM_A[21:0], EM_D[7:0],

13 GP pins:

EM_R/W, EM_CS2,

GP[54:52], GP[31:22]

EM_BA[1:0],

EM_WAIT/(RDY/BSY),

Optional Selection:

010

0 or 1

EM_WE, EM_OE

GP[33] (CS5SEL = 0),

GP[32] (CS4SEL = 0),

Optional Selection:

GP[13] (CS3SEL = 0)

EM_CS5 (CS5SEL = 1),

EM_CS4 (CS4SEL = 1),

EM_CS3 (CS3SEL = 1)

8-bit EMIFA (Async) Pinout

Mode 2:

EM_A[21:0], EM_D[7:0],

7 GP pins:

RMII:

EM_R/W, EM_CS2,

GP[54:53], GP[26:22]

RMRXER, RMRXD[1:0],

EM_BA[1:0],

010

0 or 1

RMTXD[1:0], REFCLK,

EM_WAIT/(RDY/BSY),

Optional Selection:

RMCRSDV, RMTXEN

EM_WE, EM_OE

GP[13] (CS3SEL = 0)

Optional Selection:

EM_CS3 (CS3SEL = 1)

8-bit EMIFA (NAND) Pinout

Mode 5:

44 GP pins:

EM_D[7:0], EM_A[2:1],

GP[96:89], GP[54:34],

EM_CS2,

GP[31:22], GP[11:10],

EM_WAIT/(RDY/BSY),

GP[7:5]

101

0 or 1

EM_WE, EM_OE

Optional Selection:

GP[33] (CS5SEL = 0),

EM_CS5 (CS5SEL = 1),

GP[32] (CS4SEL = 0),

EM_CS4 (CS4SEL = 1),

GP[13] (CS3SEL = 0)

EM_CS3 (CS3SEL = 1)

8-bit EMIFA (NAND) Pinout

Mode 5:

38 GP pins:

EM_D[7:0], EM_A[2:1],

GP[96:89], GP[54:34],

RMII:

EM_CS2,

GP[26:22], GP[11:10],

RMRXER, RMRXD[1:0],

101

0 or 1

EM_WAIT/(RDY/BSY),

GP[7:5]

RMTXD[1:0], REFCLK,

EM_WE, EM_OE

RMCRSDV, RMTXEN

Optional Selection:

GP[13] (CS3SEL = 0)

EM_CS3 (CS3SEL = 1)

(1)

The EMIFA pins EM_WAIT/(RDY/BSY), EM_OE, and EM_WE are non-multiplexed pins. They are available in all the configuration

options. However, they are only useful if additional EMIFA pins are functional. Therefore in this table, these pins are only listed in

configuration options C,D,E, and F.

The following is an example on how to read Table 3-37. For example, the "PINMUX Selection Fields"

columns indicate that Major Configuration Choice C is selected through setting PINMUX0.AEM = 010b

and PINMUX0.RMII = 0. Other PINMUX0 fields CS3SEL, CS4SEL, and CS5SEL can be set to either 0 or

1 based on the system's EMIFA Chip Select space need. The "Resulting Peripherals/Pins" columns

indicate that Major Configuration Option C can support the following combination of pin functions:

• Pins for 8-bit EMIFA (Async or NAND) function with EMIFA Chip Select space 2 (EM_CS2). If

additional Chip Select spaces are needed, set the corresponding PINMUX bit (CS5SEL, CS4SEL,

and/or CS3SEL) to 1.

• At least 13 GPIO pins. If the additional Chip Select spaces from EM_CS3, EM_CS4, or EM_CS5 are

not needed, the corresponding PINMUX bit (CS3SEL, CS4SEL, and/or CS5SEL) can be set to 0 to get

additional GPIO pins.

Submit Documentation Feedback

Device Configurations

103

TMS320C6421 Datasheet(PDF) 103 Page - Texas Instruments

TMS320C6421 Datasheet(HTML) 103 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL