MPC8280 datasheet(426/1386 Pages) FREESCALE

426 / 1386 page

Memory Controller

MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

11-6

Freescale Semiconductor

Figure 11-3. Simple System Configuration

Implementation differences between the supported machines are described in the following:

•

The SDRAM machine provides a glueless interface to JEDEC-compliant SDRAM devices, and

using SDRAM pipelining, page mode, and bank interleaving delivers very high performance. To

allow fine tuning of system performance, the SDRAM machine provides two types of page modes

selectable per memory bank:

— Page mode for consecutive back-to-back accesses (normal operation)

— Page mode for intermittent accesses

SDRAM machines are available on the 60x and local buses; each memory bank can be assigned to

any SDRAM machine.

•

The GPCM provides a glueless interface to EPROM, SRAM, flash EPROM (FEPROM), and other

peripherals. The GPCM is available on both buses on CS[0–11]. CS0 also functions as the global

(boot) chip-select for accessing the boot EPROM or FLASH device. The chip-select allows 0 to 30

wait states.

•

The UPMs provide a flexible interface to many types of memory devices. Each UPM can control

the address multiplexing for accessing DRAM devices and the timings of BS[0–7] and GPL. Each

UPM can be assigned either to the 60x or to the local bus. Each memory bank can be assigned to

any UPM.

Each UPM is a programmable RAM-based machine. The UPM toggles the memory controller

external signals as programmed in RAM when an internal or external master initiates any external

read or write access. The UPM also controls address multiplexing, address increment, and transfer

acknowledge (TA) assertion for each memory access. The UPM specifies a set of signal patterns

for a user-specified number of clock cycles. The UPM RAM pattern run by the memory controller

is selected according to the type of external access transacted. At every clock cycle, the logical

value of the external signals specified in the RAM array is output on the corresponding UPM pins.

Address

Data

EPROM

RAS

CAS[0–7]

Data

DRAM

CS1

GPLx

Data

BS/WE[0–7]

GPL2/OE

CS0

Address

UPMA

GPCM

MPC8280

MPC8280 Datasheet(PDF) 426 Page - Freescale Semiconductor, Inc

MPC8280 Datasheet(HTML) 426 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL