| Electronic Components Datasheet Search |
|
MPC8280 Datasheet(PDF) 833 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8280 Datasheet(HTML) 833 Page - Freescale Semiconductor, Inc |
|
833 / 1386 page ![]() Universal Serial Bus Controller MPC8280 PowerQUICC II Family Reference Manual, Rev. 1 Freescale Semiconductor 27-17 27.5.7 USB Function Programming Model The following sections describe USB controller registers. 27.5.7.1 USB Mode Register (USMOD) USMOD, shown in Figure 27-10, controls the USB controller operation mode. Table 27-9 describes USMOD fields. 0 1 23 45 67 Field LSS RESUME — SFTE TEST HOST EN Reset 0000_0000 R/W R/W Addr 0x11B60 Figure 27-10. USB Mode Register (USMOD) Table 27-9. USMOD Fields Bits Name Description 0 LSS Low-speed signaling. Selects the signaling speed. The actual bit rate depends on the USB clock source. 0 Full-speed (12-Mbps) signaling. Normal operation. 1 Low-speed (1.5-Mbps) signaling. For a point-to-point connection with a low-speed device or for local loopback testing. 1 RESUME Generate resume condition. When set, this bit generates a resume condition on the USB. This bit should be used if the function wants to exit the suspend state. 2–3 — Reserved, should be cleared. 4 SFTE Start-of-Frame Timer Enable. Setting this bit enables the Start-of-Frame timer and automatic SOF transmission. See Section 27.5.7.8, “USB Start of Frame Timer (USSFT)" and Section 27.5.2, “SOF Transmission for USB Host Controller" for more information. 0 SOF timer is disabled 1 SOF timer is enabled Note: When SFTE is 1, the PC21 pin cannot be used as CP_INT since the CP interrupt is used internally for generating the SOF packet. 5 TEST USB controller test (loopback) mode 0 Test mode is disabled 1 Test mode is enabled Note: This bit may be set only when HOST is set (USB host mode) 6 HOST USB host mode 0 USB host is disabled 1 USB host is enabled 7 EN Enable USB. When the EN bit is cleared, the USB is in a reset state 0 USB is disabled 1 USB is enabled Note: Setting this bit automatically disables SCC4. Note: Other bits of the USMOD should not be modified by the user while EN is set. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |