MK50H28 datasheet(27/64 Pages) STMICROELECTRONICS

27 / 64 page

4.2 Initialization / Priority DLCI Block

MK50H28 initialization includes the reading of the Initialization Block in the off-chip memory to obtain the

operating parameters. The Initialization Block is defined below. Upon receiving an Init primitive, the first

16 words of the Initialization block are read by the MK50H28. The remainder of the Initialization block

will be read as needed by the MK50H28. Memory at IADR+32 - IADR+38 should always be initialized

with 0’s prior to issuing the Init Primitive. Any changes to IADR+00 - IADR+31 after initialization require

that the device be stopped and Init primitive be issued again in order to take effect. It is not necessary

that the device be re-initialized after changes to bits in the CSRs (Control and Status Registers).

MODE

BASE ADDRESS

HIGHER ADDR

IADR+00

IADR+02

IADR+04

IADR+06

IADR+08

IADR+10

IADR+12

IADR+14

RESERVED

Counter dN1 (Max Frame Length)

IADR+16

IADR+18

IADR+20

IADR+22

SCALER

Timer nT1 / T391

Timer nT2 / T392

Timer TP

CTADR <15:00>

ALTADR <23:16>

ALTADR <15:00>

IADR+24

IADR+28

Counter nN1/N391

CTADR <23:16>

RESERVED

TINTADR<23:16>

RINTADR <23:16>

RESERVED

SBA <15:00>

IADR+40

IADR+44

ERROR COUNTERS

PRIORITY DLCI

IADR+96

THRU

IADR+XX

BLOCK

THRU

IADR+89

Counter nN1

SBA <15:00>

(If EIBEN=1)

IADR+42

TINTADR <23:16>

RINTADR<23:16>

RESERVED

Ntwk N393

Ntwk N392

User N393

/ nN3

User N392

/ nN2

and STATISTICS

RESERVED

(256 Entries Maximum)

RESERVED-Must be written with 0’s

IADR+32-38

Figure 8: Initialization / Priority DLCI Block

MK50H28

27/64

MK50H28 Datasheet(PDF) 27 Page - STMicroelectronics

MK50H28 Datasheet(HTML) 27 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL