AT83C5111 datasheet(74/86 Pages) ATMEL

Part #	AT83C5111

Description	Low Pin Count 8-bit Microcontroller with A/D Converter

PDF	86 Pages

Scroll/Zoom	100%

Manufacturer	ATMEL [ATMEL Corporation]

Direct Link	http://www.atmel.com

Logo

74 / 86 page

AT8xC5111

4190A–8051–11/02

6. If I

OL exceeds the test condition, VOL may exceed the relat ed specificat ion. Pins are not guaranteed to sink current great er

than the listed test conditions.

7. For other values, please contact your sales office.

8. Operat ing I

CC is measured with all output pins disconnected; XTAL1 driven with TCLCH, TCHCL = 5 ns (see Figure 34.), VIL =

SS + 0.5V,

VIH = VCC - 0.5V; XTAL2 N.C.; RST/VPP = VCC;. The internal ROM runs the code 80 FE (label: SJMP label). ICC would be

slightly higher if a crystal oscillat or is used. Measurements are made with OTP products when possible, which is the worst

case.

Figure 1. I

CC Test Condition, Under Reset

Figure 2. Operat ing I

CC Test Condition

ICC

(NC)

CL OC K

SIGNAL

All other pins are disconnected.

RST

XTAL2

XTAL1

(NC)

CLO C K

SIGNAL

All other pins are disconnected.

RST

XTAL2

XTAL1

Reset = V

SS after a high pulse

during at least 24 clock cycles

AT83C5111 Datasheet(PDF) 74 Page - ATMEL Corporation