| Electronic Components Datasheet Search |
|
STM32WB55CC Datasheet(PDF) 19 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32WB55CC Datasheet(HTML) 19 Page - STMicroelectronics |
|
19 / 165 page ![]() DS11929 Rev 3 19/165 STM32WB55xx Functional overview 69 3.3.4 Embedded SRAM STM32WB55xx devices feature up to 256 KB of embedded SRAM, split in three blocks: • SRAM1: 192 KB mapped at address 0x2000 0000 • SRAM2a: 32 KB located at address 0x2003 0000 (contiguous to SRAM1) also mirrored at 0x1000 0000, with hardware parity check (this SRAM can be retained in Standby mode) • SRAM2b: 32 KB located at address 0x2003 8000 (contiguous with SRAM2a) and mirrored at 0x1000 8000 with hardware parity check SRAM2a and SRAM2b can be write-protected, with 1 KB granularity, A section of the SRAM2a and SRAM2b is secured for the RF sub-system and cannot be accessed by the host CPU1. The SRAMs can be accessed in read/write with 0 wait states for all CPU1 and CPU2 clock speeds. 3.4 Security and safety The STM32WB55xx contains many security blocks both for the BLE or IEEE 802.14.5 and the Host application. It includes: • Customer storage of the BLE and 802.14.5 Keys • Secure Flash memory partition for RF subsystem only access • Secure SRAM partition, that can be accessed only by the RF subsystem • True Random Number Generator (RNG) • Advance Encryption Standard hadware accelerators (AES-128bit and AES-256bit, supporting chaining modes ECB, CBC, CTR, GCM, GMAC, CCM) • Private Key Acceleration (PKA) including: – Modular arithmetic including exponentiation with maximum modulo size of 3136 bits – Elliptic curves over prime field scalar multiplication, ECDSA signature, ECDSA verification with maximum modulo size of 521 bits • Cyclic redundancy check calculation unit (CRC) A specific mechanism is in place to ensure that all the code executed by the RF subsystem CPU2 can be secure, whatever the Host application. For the AES1 a customer key can be managed by the CPU2 and used by the CPU1 to encrypt/decrypt data. 3.5 Boot modes and FW update At startup, BOOT0 pin and BOOT1 option bit are used to select one of three boot options: • Boot from user Flash • Boot from system memory • Boot from embedded SRAM |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |