| Electronic Components Datasheet Search |
|
VSC8658 Datasheet(PDF) 43 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC8658 Datasheet(HTML) 43 Page - Microsemi Corporation |
|
43 / 95 page ![]() Configuration VMDS-10242 VSC8658 Datasheet Revision 4.1 35 5.2.14 1000BASE-T Status Extension 2 The second status extension register is at address 17 in the device main registers space. It provides information about another set of parameters associated with 1000BASE-T communications. For information about the first status extension register, see Table 23, page 34. 5.2.15 Bypass Control The bits in the Bypass Control register in the VSC8658 device control aspects of functionality in effect when the device is disabled so that traffic can bypass it in your design. The following table shows the settings available. Table 24 • 1000BASE-T Status Extension 2, Address 17 (0x11) Bit Name Access Description Default 15 1000BASE-T descrambler RO 1 = Descrambler locked. 0 14 1000BASE-T lock error RO This is a self-clearing bit. 1 = Lock error detected. 0 13 1000BASE-T disconnect state RO This is a self-clearing bit. 1 = PHY 1000BASE-T link disconnect detected. 0 12 1000BASE-T current link status RO 1 = PHY 1000BASE-T link active. 0 11 1000BASE-T receive error RO This is a self-clearing bit. 1 = Receive error detected. 0 10 1000BASE-T transmit error RO This is a self-clearing bit. 1 = Transmit error detected. 0 9 1000BASE-T SSD error RO This is a self-clearing bit. 1 = Start-of-stream delimiter error detected. 0 8 1000BASE-T ESD error RO This is a self-clearing bit. 1 = End-of-stream delimiter error detected. 0 7 1000BASE-T carrier extension error RO This is a self-clearing bit. 1 = Carrier extension error detected. 0 6:0 Reserved RO Table 25 • Bypass Control, Address 18 (0x12) Bit Name Access Description Default 15 Transmit disable R/W 1 = PHY transmitter disabled. 0 14:9 Reserved RO 8 1000BASE-T transmitter test clock R/W 1 = Enabled. 0 7 Auto MDI-X at forced 10/100 R/W This is a sticky bit. 1 = Disable Auto MDI-X at forced 10/100 speeds. 1 6Reserved RO 5 Disable pair swap correction R/W This is a sticky bit. 1 = Disable the automatic pair swap correction. 0 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |