AM79C940JCSLASHW datasheet(92/144 Pages) AMD

92 / 144 page

DC CHARACTERISTICS (Continued)

Notes:

1. VOH does not apply to open-drain output pins.

2. IIL1 and IIL2 applies to all input only pins except DI±, CI±, and XTAL1.

IIL1 = ADD4–0, BE1–0, CS, EAM/R, FDS, RESET, RXDAT, R/W, SCLK.

IIL2 =TC, TDI, TCK, TMS.

3. Specified for input only pins with internal pull-ups: TC, TDI, TCK, TMS.

4. IOZ applies to all three-state output pins and bi-directional pins.

5. Test not implemented to data sheet specification.

6. Tested, but to values in excess of limits. Test accuracy not sufficient to allow screening guard bands.

7. During the activation of SLEEP:

–The following pins are placed in a high impedance state: SRD, SF/BD, TXDAT, DXCVR, DTV, TDTREQ, RDTREQ, NTR

and TDO.

–The following I/O pins are placed in a high impedance mode and have their internal TTL level translators disabled:

DBUS15–0, EOF, SRDCLK, RXCRS, RXDAT, CLSN, TXEN, STDCLK and TXDAT+.

–The following input pin has its internal pull-up and TTL level translator disabled: TC.

–The following input pins have their internal TTL level translators disabled and do not have internal pull-ups: CS, FDS,

R/W, ADD4-0, SCLK, BE0, BE1 and EAM/R.

–The following pins are pulled low: XTAL1 (XTAL2 feedback is cut off from XTAL1), TXD+, TXD–, TXP+, TXP–, DO+

and DO.

–The following pins have their input voltage bias disabled: DI+, DI, CI+ and CI.

–AWAKE and RWAKE are reset to zero. IDDSLEEP, with either AWAKE set or RWAKE set, will be much higher and its

value remains to be determined.

8. Parameter not tested.

9. For industrial temperature version, Max value is –150

µA.

10. For industrial temperature version, Max value is +150

µA.

Parameter

Symbol

Parameter Description

Test Conditions

Min

Max

Unit

VLTHS–

RXD Post-Squelch

Negative Threshold (Peak)

LRT = LOW

–156

–90

VRXDTH

RXD Switching Threshold

(Note 4)

–35

VTXH

TXD

± and TXD± Output

HIGH Voltage

DVSS = 0V

DVDD –0.6

DVDD

VTXL

TXD

± and TXD± Output

LOW Voltage

DVDD = +5V

DVSS

DVSS + 0.6

VTXI

TXD

± and TXD± Differential

Output Voltage Imbalance

–40

+40

VTXOFF

TXD

± and TXD± Idle Output

Voltage

DVDD = +5V

RTX

TXD

± Differential Driver Output

Impedance

(Note 8)

Ω

TXD

± Differential Driver Output

Impedance

(Note 8)

Ω

AM79C940JC/W Datasheet(PDF) 92 Page - Advanced Micro Devices

AM79C940JC/W Datasheet(HTML) 92 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL