IMX53IEC datasheet(9/173 Pages) FREESCALE

9 / 173 page

Modules List

i.MX53 Applications Processors for Industrial Products, Rev. 6

Freescale Semiconductor

ESDHCV3-3

Ultra-High-

Speed eMMC /

SD Host

Controller

Connectivity

Peripherals

Ultra high-speed eMMC / SD host controller, enhanced to support eMMC

4.4 standard specification, for 832 MBps.

• Port 3 is specifically enhanced to support eMMC 4.4 specification, for

double data rate (832 Mbps, 8-bit port).

ESDHCV3 is backward compatible to ESDHCV2 and supports all the

features of ESDHCV2 as described below.

ESDHCV2-1

ESDHCV2-2

ESDHCv2-4

Enhanced

Multi-Media Card

Secure Digital

Host Controller

Enhanced multimedia card / secure digital host controller

• Ports 1, 2, and 4 are compatible with the “MMC System Specification”

version 4.3, full support and supporting 1, 4 or 8-bit data.

The generic features of the eSDHCv2 module, when serving as SD / MMC

host, include the following:

• Can be configured either as SD / MMC controller

• Supports eSD and eMMC standard, for SD/MMC embedded type cards

• Conforms to SD Host Controller Standard Specification, version 2.0, full

support.

• Compatible with the SD Memory Card Specification, version 1.1

• Compatible with the SDIO Card Specification, version 1.2

• Designed to work with SD memory, miniSD memory, SDIO, miniSDIO,

SD Combo, MMC and MMC RS cards

• Configurable to work in one of the following modes:

—SD/SDIO 1-bit, 4-bit

—MMC 1-bit, 4-bit, 8-bit

• Full/high speed mode.

• Host clock frequency variable between 32 kHz to 52 MHz

• Up to 200 Mbps data transfer for SD/SDIO cards using 4 parallel data

lines

• Up to 416 Mbps data transfer for MMC cards using 8 parallel data lines

FEC

Fast Ethernet

Controller

Connectivity

Peripherals

The Ethernet media access controller (MAC) is designed to support both

10 Mbps and 100 Mbps Ethernet/IEEE Std 802.3™ networks. An external

transceiver interface and transceiver function are required to complete the

interface to the media. The i.MX53 also consists of HW assist for

IEEE1588™ standard. See, TSU and CE_RTC (IEEE1588) section for more

details.

FIRI

Fast Infrared

Interface

Connectivity

Peripherals

Fast infrared interface

FLEXCAN-1

FLEXCAN-2

Flexible

Controller Area

Network

Connectivity

Peripherals

The controller area network (CAN) protocol was primarily, but not

exclusively, designed to be used as a vehicle serial data bus. Meets the

following specific requirements of this application: real-time processing,

reliable operation in the EXTMC environment of a vehicle,

cost-effectiveness and required bandwidth. The FLEXCAN is a full

implementation of the CAN protocol specification, Version 2.0 B (ISO

11898), which supports both standard and extended message frames at

1 Mbps.

Table 2. i.MX53 Digital and Analog Blocks (continued)

Block

Mnemonic

Block Name

Subsystem

Brief Description

IMX53IEC Datasheet(PDF) 9 Page - Freescale Semiconductor, Inc

IMX53IEC Datasheet(HTML) 9 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL