7540 datasheet(59/366 Pages) RENESAS

59 / 366 page

1-40

REJ09B0018-0200Z

Rev.2.00

Jun 21, 2004

HARDWARE

7540 Group

FUNCTIONAL DESCRIPTION

Serial I/O2 operation

By writing to the serial I/O2 register (address 003116) the serial I/

O2 counter is set to “7”.

After writing, the SDATA2 pin outputs data every time the transfer

clock shifts from “H” to “L”. And, as the transfer clock shifts from

“L” to “H”, the SDATA2 pin reads data, and at the same time the

contents of the serial I/O2 register are shifted by 1 bit.

When the internal clock is selected as the transfer clock source,

the following operations execute as the transfer clock counts up to

• Serial I/O2 counter is cleared to “0”.

• Transfer clock stops at an “H” level.

• Interrupt request bit is set.

• Shift completion flag is set.

Also, the SDATA2 pin is in a high impedance state after the data

transfer is completed (refer to Fig.37).

When the external clock is selected as the transfer clock source,

the interrupt request bit is set as the transfer clock counts up to 8,

but external control of the clock is required since it does not stop.

Notice that the SDATA2 pin is not in a high impedance state on the

completion of data transfer.

Also, after the receive operation is completed, the transmit/receive

shift completion flag is cleared by reading the serial I/O2 register.

At transmit, the transmit/receive shift completion flag is cleared

and the transmit operation is started by writing to serial I/O2 regis-

ter.

Fig. 37 Serial I/O2 timing (LSB first)

Note :

Synchronous clock

Serial I/O2 register

write signal

Transfer clock

(Note)

SDATA2 at serial I/O2

input receive

SDATA2 at serial I/O2

output transmit

Serial I/O2 interrupt request bit set

Transmit/receive shift completion flag set

When the internal clock is selected as the transfer and the direction register of P1 3/SDATA2 pin is set to the input mode,

the SDATA2 pin is in a high impedance state after the data transfer is completed.

7540 Datasheet(PDF) 59 Page - Renesas Technology Corp

7540 Datasheet(HTML) 59 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL