V62SLASH12615-01XE-R datasheet(73/92 Pages) TI1

73 / 92 page

DP83848-EP

www.ti.com

SLLSEC6D – SEPTEMBER 2012 – REVISED JUNE 2013

Table 9-9. Auto-Negotiation Link Partner Ability Register (ANLPAR) (Next Page), Address

0x05 (continued)

BIT

BIT NAME

DEFAULT

DESCRIPTION

Acknowledge:

1 = Link Partner acknowledges reception of the ability data word

0 = Not acknowledged

ACK

0, RO

The Auto-Negotiation state machine will automatically control the this

bit based on the incoming FLP bursts. Software should not attempt to

write to this bit.

Message Page:

0, RO

1 = Message Page

0 = Unformatted Page

Acknowledge 2:

1 = Link Partner does have the ability to comply to next page

ACK2

0, RO

message

0 = Link Partner does not have the ability to comply to next page

message

Toggle:

Toggle

0, RO

1 = Previous value of the transmitted Link Code word equalled 0

0 = Previous value of the transmitted Link Code word equalled 1

Code:

This field represents the code field of the next page transmission. If

the MP bit is set (bit 13 of this register), then the code shall be

10:0

CODE

<000 0000 0000>, RO

interpreted as a “Message Page,” as defined in annex 28C of Clause

28. Otherwise, the code shall be interpreted as an “Unformatted

Page,” and the interpretation is application specific.

9.2.8

Auto-Negotiate Expansion Register (ANER)

This register contains additional local device and link partner status information.

Table 9-10. Auto-Negotiate Expansion Register (ANER), Address 0x06

BIT

BIT NAME

DEFAULT

DESCRIPTION

15:5

RESERVED

0, RO

RESERVED: Writes ignored, Read as 0

Parallel Detection Fault:

PDF

0, RO

1 = A fault has been detected via the Parallel Detection function

0 = A fault has not been detected

Link Partner Next Page Able:

LP_NP_ABLE

0, RO

1 = Link Partner does support Next Page

0 = Link Partner does not support Next Page

Next Page Able:

NP_ABLE

1, RO/P

1 = Indicates local device is able to send additional “Next Pages”

Link Code Word Page Received:

PAGE_RX

0, RO/COR

1 = Link Code Word has been received, cleared on a read

0 = Link Code Word has not been received

Link Partner Auto-Negotiation Able:

LP_AN_ABLE

0, RO

1 = indicates that the Link Partner supports Auto-Negotiation

0 = indicates that the Link Partner does not support Auto-Negotiation

Submit Documentation Feedback

Product Folder Links: DP83848-EP

V62/12615-01XE-R Datasheet(PDF) 73 Page - Texas Instruments

V62/12615-01XE-R Datasheet(HTML) 73 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

Datasheet Download

Link URL