 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
SH79F166AP/044PR Datasheet(PDF) 70 Page - SINOWEALTH Electronic Ltd |
|
|
|||||||||||||||||||||||||||||
SH79F166AP/044PR Datasheet(HTML) 70 Page - SINOWEALTH Electronic Ltd |
|
|
70 / 113 page  SH79F166A 70 8.3 PWM (Pulse Width Modulation) 8.3.1 Feature Complementary output with dead time control Provided interrupt function on period Selectable output polarity Fault Detect function provided to disable PWM output immediately Lock register provided to avoid PWM control register to be unexpected change The SH79F166A has one 12-bit PWM module. Which can provide the pulse width modulation waveform with the period and the duty being controlled individually by corresponding register. PWM timer can be turned to inactive state by the input of FLT pin automatically if EFLT is set. PWM timer also provides 1 interrupts for PWM0. This makes it possible to change period or duty in every PWM period. 8.3.2 PWM Module Enable Table 8.12 PWM Module Enable Register CFH Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 PWMEN - EFLT - - EPWM01 - - EPWM0 R/W - R/W - - R/W - - R/W Reset Value (POR/WDT/LVR/PIN) - 0 - - 0 - - 0 Bit Number Bit Mnemonic Description 6 EFLT FLT pin configuration: 0: general purpose I/O or SS ——— pin (default) 1: PWM Fault Detect input pin 3 EPWM01 PWM01 output enable 0: I/O port 1: PWM output 0 EPWM0 Enable 12-bit PWM0 0: I/O port 1: PWM output PWM output will be disable at the same time when the PWM Enable register is clear to 0. The main purpose of the FLT pin is to inactivate the PWM output signals and drive them into an inactive state. The action of the FLT is performed directly in hardware so that when a fault occurs, it can be managed quickly and the PWMs outputs are put into an inactive state to save the power devices connected to the PWMs. The FLT pin has no internal pull-high resistor. If EFLT is set to 0, it means the level on FLT pin has no effect on PWM timers. Table 8.13 PWM Module Enable Register B7H Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 PWMEN1 - - - - - - - PWM0 R/W - - - - - - - R/W Reset Value (POR/WDT/LVR/PIN) - - - - - - - 0 Bit Number Bit Mnemonic Description 0 PWM0 Enable 12-bit PWM0 0: PWM output enable 1: PWM output disable, PWM0. PWM01 as I/O, but PWM timer can work normally, Trigger interrupt |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
