| Electronic Components Datasheet Search |
|
AD4080BBCZ Datasheet(PDF) 11 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD4080BBCZ Datasheet(HTML) 11 Page - Analog Devices |
|
11 / 95 page ![]() Data Sheet AD4080 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS analog.com Rev. 0 | 11 of 95 Table 6. Pin Function Descriptions (Continued) Pin No. Mnemonic Type1 Description falling edge of the data interface clock (DCLK). Note that this pin does not go into a high impedance state when used in four-lane SPI mode when CS is inactive. This pin must be left unconnected if not being used. D7 DA−/SDOB DO Data Interface Output In LVDS data interface mode (default), this output pin along with DA+ serves as the primary LVDS Data Lane A. If unused, leave unconnected. In SPI data interface mode, this pin functions as Serial Data Output B (SDOB). This is the only active serial data output in single lane mode. Result data is shifted out of this pin on the falling edge of the data interface clock (DCLK). E1 IN− AI Negative Analog Differential Input. E2 AUXIN− AI Negative Auxiliary Analog Differential Input. E6 GPIO1 DI/O General-Purpose Input and Output 1 Pin. E7 SCLK DI Configuration Interface Serial Data Clock. This clock input is used to shift data into and out of the device configuration memory. F1 GPIO2 DI/O General-Purpose Input and Output 2 Pin. F2 GPIO3 DI/O General-Purpose Input and Output 3 Pin. F3, G3 VDD33 P 3.3 V Supply Rail Inputs. These supply pins are internally decoupled by a 470 nF capacitor to GND. F4, G4 REFIN AI 3.0 V Reference Voltage Inputs. F7 SDI DI Serial Data Input. Configuration data is shifted into this input on the rising edge of the serial data clock, SCLK. G1 CS DI Configuration Interface Chip Select Input (Active Low). The CS input frames serial data transfers over the configuration SPI. G2 CMO AO Common-Mode Voltage (VCM) Output. G6 DNC DNC Do Not Connect. G7 GPIO0 DI/O General-Purpose Input and Output 0 Pin. 1 AI is analog input, AO is analog output, DI is digital input; DI/O is digital input and output, DO is digital output, and P is power. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |