| Electronic Components Datasheet Search |
|
CLRC63201T/0FE Datasheet(PDF) 112 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
CLRC63201T/0FE Datasheet(HTML) 112 Page - NXP Semiconductors |
|
112 / 163 page ![]() Philips Semiconductors Product Specification Rev. 3.0; May 2003 Multiple Protocol Contactless Reader IC CL RC632 112 Confidential 18 CL RC632 COMMAND SET 18.1 General Description The CL RC632 behaviour is determined by an internal state machine capable to perform a certain set of commands. The commands can be started by writing the according command-code to the Command- Register. Arguments and/or data necessary to process a command are mainly exchanged via the FIFO buffer. 18.2 General Behaviour • Each command, that needs a data stream (or data byte stream) as input will immediately process the data it finds in the FIFO buffer. • Each command that needs a certain number of arguments will start processing only when it has received the correct number of arguments via the FIFO buffer. • The FIFO buffer is not cleared automatically at command start. Therefore, it is also possible to write the command arguments and/or the data bytes into the FIFO buffer and start the command afterwards. • Each command (except the StartUp-Command) may be interrupted by the µ-Processor by writing a new command code into the Command-Register e.g.: the Idle-Command. 18.3 CL RC632 Commands Overview Command Code Action Arguments and Data passed via FIFO Returned Data via FIFO see Chapter StartUp 3Fhex Runs the Reset- and Initialisation Phase. Note: This command can not be activated by software, but only by a Power-On or Hard Reset - - 18.3.2 Idle 00hex No action; cancels current command execution. - - 18.3.3 Transmit 1Ahex Transmits data from the FIFO buffer to the card. Data Stream - 18.4.1 Receive 16hex Activates receiver circuitry. Note: Before the receiver actually starts, the state machine waits until the time configured in the register RxWait has passed. Note: This command may be used for test purposes only, since there is no timing relation to the Transmit- Command. - Data Stream 18.4.2 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |