SH7713 datasheet(162/904 Pages) RENESAS

162 / 904 page

Section 3 DSP Operating Unit

Rev.1.50 Aug. 30, 2006 Page 122 of 860

REJ09B0288-0150

guard-bit parts, the DC bit is set. Even though guard bits are provided in the destination register,

the DC bit always indicates the result of when no guard bits are provided. So, the DC bit is always

set if the guard-bit parts are used for large number representation. Some DC bit generation

examples in overflow mode are shown in figure 3.13.

Example 1

Overflow detecting field

Guard bits

Overflow case

1111

1000

1111

0000

1111

0000

1111

0000

111111110111111111111111

Example 2

Overflow detecting field

Guard bits

Non overflow case

1111

1000

1111

0000

1111

0000

1111

0001

111111111000 0000 0000 0000

Figure 3.13 DC Bit Generation Examples in Overflow Mode

Signed Greater Than Mode: CS[2:0] = 100: The DC bit indicates whether or not the source 1

data (signed) is greater than the source 2 data (signed) as the result of compare operation PCMP.

This mode is similar to the Negative Value Mode described before, because the result of a

compare operation is a positive value if the source 1 data is greater than the source 2 data.

However, the signed bit of the result shows a negative value if the compare operation yields a

result beyond the range of the destination operand, including the guard-bit parts (called “Over-

range”), even though the source 1 data is greater than the source 2 data. The DC bit is updated

concerning this type of special case in this condition mode. The equation below shows the

definition of getting this condition:

DC = ~ {(Negative ^ Over-range) | Zero}

When the PCMP operation is executed under this condition mode, the result of the DC bit is the

same as the T bit’s result of the CMP/GT operation of the CPU instruction.

Signed Greater Than or Equal Mode: CS[2:0] = 101: The DC bit indicates whether the source

1 data (signed) is greater than or equal to the source 2 data (signed) as the result of compare

operation PCMP. This mode is similar to the Signed Greater Than Mode described before but the

equal case is also included in this mode. The equation below shows the definition of getting this

condition:

DC = ~ (Negative ^ Over-range)

When the PCMP operation is executed under this condition mode, the result of the DC bit is the

same as the T bit’s result of a CMP/GE operation of the SH core instruction.

SH7713 Datasheet(PDF) 162 Page - Renesas Technology Corp

SH7713 Datasheet(HTML) 162 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL