PIC18LC658T-ESLASHCL datasheet(45/366 Pages) MICROCHIP

45 / 366 page

 2000 Microchip Technology Inc.

Advanced Information

DS30475A-page 45

PIC18CXX8

4.4

PCL, PCLATH and PCLATU

The program counter (PC) specifies the address of the

instruction to fetch for execution. The PC is 21-bits

wide. The low byte is called the PCL register. This reg-

ister is readable and writable. The high byte is called

the PCH register. This register contains the PC<15:8>

bits and is not directly readable or writable. Updates to

the PCH register may be performed through the

PCLATH register. The upper byte is called PCU. This

readable or writable. Updates to the PCU register may

be performed through the PCLATU register.

The PC addresses bytes in the program memory. To

prevent the PC from becoming misaligned with word

instructions, the LSb of PCL is fixed to a value of ’0’.

The PC increments by 2 to address sequential instruc-

tions in the program memory.

The CALL,

RCALL,

GOTO

and program branch

instructions write to the program counter directly. For

these instructions, the contents of PCLATH and

PCLATU are not transferred to the program counter.

The contents of PCLATH and PCLATU will be trans-

ferred to the program counter by an operation that

writes PCL. Similarly, the upper two bytes of the pro-

gram counter will be transferred to PCLATH and

PCLATU by an operation that reads PCL. This is useful

for computed offsets to the PC (See Section 4.8.1).

4.5

Clocking Scheme/Instruction Cycle

The clock input (from OSC1) is internally divided by

four to generate four non-overlapping quadrature

clocks, namely Q1, Q2, Q3 and Q4. Internally, the pro-

gram counter (PC) is incremented every Q1, the

instruction is fetched from the program memory and

latched into the instruction register in Q4. The instruc-

tion is decoded and executed during the following Q1

through Q4. The clocks and instruction execution flow

are shown in Figure 4-3.

FIGURE 4-3:

CLOCK/INSTRUCTION CYCLE

OSC1

OSC2/CLKOUT

(RC mode)

PC+2

PC+4

Fetch INST (PC)

Execute INST (PC-2)

Fetch INST (PC+2)

Execute INST (PC)

Fetch INST (PC+4)

Execute INST (PC+2)

Internal

phase

clock

PIC18LC658T-E/CL Datasheet(PDF) 45 Page - Microchip Technology

PIC18LC658T-E/CL Datasheet(HTML) 45 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL