Z8F082ASH020SC datasheet(95/244 Pages) ZILOG

95 / 244 page

PS024705-0405

P R E L I M I N A R Y

Timers

Z8 Encore! XP® F08xA Series

Product Specification

number of cycles time delay before the Timer Output and the Timer Output

Complement is forced to High (1).

1 = Timer Output is forced High (1) and Timer Output Complement is forced Low (0)

when the timer is disabled. When enabled, the Timer Output is forced Low (0) upon

PWM count match and forced High (1) upon Reload.When enabled, the Timer Output

Complement is forced High (1) upon PWM count match and forced Low (0) upon

Reload. The PWMD field in TxCTL0 register is a programmable delay to control the

number of cycles time delay before the Timer Output and the Timer Output

Complement is forced to Low (0).

CAPTURE RESTART mode

0 = Count is captured on the rising edge of the Timer Input signal.

1 = Count is captured on the falling edge of the Timer Input signal.

COMPARATOR COUNTER mode

When the timer is disabled, the Timer Output signal is set to the value of this bit.

When the timer is enabled, the Timer Output signal is complemented upon timer

Reload.

When the Timer Output alternate function TxOUT on a GPIO port pin is enabled, Tx-

OUT will change to whatever state the TPOL bit is in.The timer does not need to be en-

abled for that to happen. Also, the Port data direction sub register is not needed to be set

to output on TxOUT. Changing the TPOL bit with the timer enabled and running does

not immediately change the TxOUT.

PRES—Prescale value.

The timer input clock is divided by 2PRES, where PRES can be set from 0 to 7. The pres-

caler is reset each time the Timer is disabled. This reset ensures proper clock division each

time the Timer is restarted.

000 = Divide by 1

001 = Divide by 2

010 = Divide by 4

011 = Divide by 8

100 = Divide by 16

101 = Divide by 32

110 = Divide by 64

111 = Divide by 128

TMODE—Timer mode

This field along with the TMODEHI bit in TxCTL0 register determines the operating

mode of the timer. TMODEHI is the most significant bit of the Timer mode selection

value.

0000 = One-Shot mode

0001 = Continuous mode

0010 = Counter mode

Caution:

Z8F082ASH020SC Datasheet(PDF) 95 Page - Zilog, Inc.

Z8F082ASH020SC Datasheet(HTML) 95 Page - Zilog, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL