| Electronic Components Datasheet Search |
|
PM3350-SW Datasheet(PDF) 73 Page - PMC-Sierra, Inc |
|
|
|||||||||||||||||||||||||||||
PM3350-SW Datasheet(HTML) 73 Page - PMC-Sierra, Inc |
|
73 / 224 page ![]() ELAN 8X10 PM3350 ELAN 8 X10 DATA SHEET PMC-970109 ISSUE 3 8 PORT ETHERNET SWITCH PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND PMC-SIERRA, INC. CUSTOMERS ONLY 71 SrcChip: 8-bit index of source device that received packet. For the ELAN 8x10 system, this must range from 0 through 7. The NextDD field in the data descriptor contains a pointer to the next data descriptor in a chain of descriptors that constitutes a queue of Ethernet frames or messages. If this is the last (or only) element in the queue or chain, then this field is set to zero to indicate a NULL pointer. The Flags field holds a set of flag bits and bitfields that provide type and control information for the data descriptor, and is formatted as follows: 76 5 4 3 0 Learn Special Type TypeSpecific Learn: If set, indicates that the source address (SA) field of the Ethernet frame pointed to by this descriptor contains a new MAC address that must be learned by the device. Only valid for Ethernet frames received by the ELAN 8x10 from the PCI expansion port; should not be set if the data descriptor points to a message. Special: If set, indicates that the data contained within the packet buffer chain pointed to by this data descriptor requires special processing by the firmware, and should not be treated as a normal Ethernet frame. This bit is typically set to indicate a message that is being passed between devices on the PCI expansion port. Type: This 2-bit field contains the type of frame pointed to by the data descriptor FirstPB field, and is interpreted as follows: Type Interpretation 00 Unicast frame from remote device 01 Unicast frame from local MAC channel 10 Broadcast frame from remote device 11 Broadcast frame from local MAC channel The above definitions of the Type field are only valid if the Special bit is clear, indicating that this data descriptor points to a normal Ethernet frame. TypeSpecific: The 4-bit TypeSpecific field is used to hold information specific to the type of |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |