PIC16C765SLASHP datasheet(61/158 Pages) MICROCHIP

61 / 158 page

Advanced Information

DS41124A-page 61

PIC16C745/765

10.5.1.2

USB Interrupt Enable Register (UIE)

The USB Interrupt Enable Register (UIE) contains

enable bits for each of the interrupt sources within the

USB. Setting any of these bits will enable the respec-

tive interrupt source in the UIR register. The values in

the UIE register only affect the propagation of an inter-

rupt condition to the PIE1 register. Interrupt conditions

can still be polled and serviced.

USB INTERRUPT ENABLE REGISTER (UIE: 191h)

U-0

R/W-0

—

STALL

UIDLE

TOK_DNE ACTIVITY

UERR

USB_RST

R = Readable bit

W = Writable bit

U = Unimplemented bit,

read as ‘0’

-n = Value at POR reset

bit7

bit0

bit 7-6:

Unimplemented: Read as '0'.

bit 5:

STALL: Set to enable STALL interrupts.

= STALL interrupt enabled

= STALL interrupt disabled

bit 4:

UIDLE: Set to enable IDLE interrupts.

= IDLE interrupt enabled

= IDLE interrupt disabled

bit 3:

TOK_DNE: Set to enable TOK_DNE interrupts.

= TOK_DNE interrupt enabled

= TOK_DNE interrupt disabled

bit 2(1): ACTIVITY: Set to enable ACTIVITY interrupts.

= ACTIVITY interrupt enabled

= ACTIVITY interrupt disabled

bit 1:

UERR: Set to enable ERROR interrupts.

= ERROR interrupt enabled

= ERROR interrupt disabled

bit 0:

USB_RST: Set to enable USB_RST interrupts.

= USB_RST interrupt enabled

= USB_RST interrupt disabled

Note 1: This interrupt is the only interrupt active during UCTRL suspend = 1.

PIC16C765/P Datasheet(PDF) 61 Page - Microchip Technology

PIC16C765/P Datasheet(HTML) 61 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL