GRM552B11H102KA01D datasheet(75/221 Pages) MURATA

75 / 221 page

Continued from the preceding page.

Apply 200% of the rated voltage for 1000

±12 hours at the

maximum operating temperature

±3°C. Let sit for 24±2 hours

at room temperature, then measure.

The charge/discharge current is less than 50mA.

• Initial measurement for high dielectric constant type.

Apply 200% of the rated DC voltage for one hour at the

maximum operating temperature

±3°C. Remove and let sit for

±2 hours at room temperature. Perform initial

measurement.

High Temperature

Load

The measured and observed characteristics should satisfy the

specifications in the following table.

Appearance

No marking defects

Capacitance

Change

Within

±3%

±0.3pF

(whichever is

larger)

R7, R6, C7: Within

±12.5%

Q/D.F.

30pF and over:

U350

10pF and over,

30pF and below:

U275+5C/2

10pF and below:

U200+10C

C: Nominal

Capacitance (pF)

I.R.

More than 1,000M

Ω or 50Ω · F (whichever is smaller)

No.

Test Method

Specifications

Temperature

Compensating Type

High Dielectric Type

Item

Char.

Nominal Values

(ppm/

°C) *1

±30

Max.

0.58

Min.

–0.24

Max.

0.40

Min.

–0.17

Max.

–55

°C

Capacitance Change from 25

°C (%)

–30

°C

–10

°C

0.25

Min.

–0.11

*1: Nominal values denote the temperature coefficient within a range of 25 to 125

°C.

Table A

GNM Series Specifications and Test Methods (1)

Char.

25V min.

0.04

max.

16V

0.05

max.

10V/6.3V

0.05

max.

R7, R6,

!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.

0. Please check with our sales representatives or product engineers before ordering.

2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product

0. specifications before ordering.

GNM Series Specifications and Test Methods (1)

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).

When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 75 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 75 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL