GRM552B11H102KA01D datasheet(86/221 Pages) MURATA

86 / 221 page

Continued from the preceding page.

Apply 200% of the rated voltage for 1000

±12 hours at the

maximum operating temperature

±3°C. Let sit for 24±2 hours

at room temperature, then measure. The charge/discharge

current is less than 50mA.

•Initial measurement.

Apply 200% of the rated DC voltage for one hour at the

maximum operating temperature

±3°C. Remove and let sit for

±2 hours at room temperature.

Perform initial measurement.

High

Temperature

Load

Appearance

No marking defects

Capacitance

Change

Within

±12.5%

D.F.

W.V.: 10V min.; 0.05 max.

W.V.: 6.3V max.; 0.075 max.

I.R.

More than 1,000M

Ω or 50Ω · F

(whichever is smaller)

Apply the rated voltage at 40

±2°C and 90 to 95% humidity for

500

±12 hours. Remove and let sit for 24±2 hours at room

temperature, then measure. The charge/discharge current is

less than 50mA.

Humidity

Load

Appearance

No marking defects

Capacitance

Change

Within

±12.5%

D.F.

W.V.: 10V min.; 0.05 max.

W.V.: 6.3V max.; 0.075 max.

I.R.

More than 500M

Ω or 25Ω · F

(whichever is smaller)

Set the capacitor at 40

±2°C and 90 to 95% humidity for 500±12

hours. Remove and let sit for 24

±2 hours at room temperature,

then measure.

Humidity

(Steady

State)

Appearance

No marking defects

Capacitance

Change

Within

±12.5%

D.F.

W.V.: 10V min.; 0.05 max.

W.V.: 6.3V max.; 0.075 max.

I.R.

More than 1,000M

Ω or 50Ω · F (whichever is smaller)

Fix the capacitor to the supporting jig in the same manner and

under the same conditions as (10).

Perform the five cycles according to the four heat treatments

listed in the following table. Let sit for 24

±2 hours at room

temperature, then measure.

• Initial measurement.

Perform a heat treatment at 150+0/–10

°C for one hour and

then let sit for 24

±2 hours at room temperature. Perform the

initial measurement.

Temperature

Cycle

Appearance

No marking defects

Capacitance

Change

Within

±7.5%

D.F.

W.V.: 25V min.; 0.025 max.

W.V.: 16V/10V max.; 0.035 max.

W.V.: 6.3V max.; 0.05 max.

I.R.

More than 10,000M

Ω or 500Ω · F (whichever is smaller)

Dielectric

Strength

No failure

LLL/LLA/LLM Series Specifications and Test Methods (1)

Step

Temp. (

°C)

Time (min.)

Min. Operating

Temp. +0/–3

±3

Room

Temp.

2 to 3

Max. Operating

Temp. +3/–0

±3

Room

Temp.

2 to 3

No.

Test Method

Specifications

Item

!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.

0. Please check with our sales representatives or product engineers before ordering.

2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product

0. specifications before ordering.

LLL/LLR/LLA/LLM Series Specifications and Test Methods (1)

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1).

When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 86 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 86 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL