GRM552B11H102KA01D datasheet(88/221 Pages) MURATA

88 / 221 page

The ESR should be measured at room temperature with the

Equivalent of HP4294A.

ESR

Within below ESR value at Frequency: 10

±0.1MHz

100m

Ω: Within 70 to 130mΩ

220m

Ω: Within 154 to 286mΩ

470m

Ω: Within 329 to 611mΩ

1000m

Ω: Within 700 to 1300mΩ

Apply 150% of the rated voltage for 1000

±12 hours at the

maximum operating temperature

±3°C.

The charge/discharge current is less than 50mA.

•Initial measurement

Perform a heat treatment at 150+0/–10

°C for one hour and

then let sit for 24

±2 hours at room temperature. Perform the

initial measurement.

•Measurement after test

Perform a heat treatment at 150+0/–10

°C for one hour and

then let sit for 24

±2 hours at room temperature, then measure.

Durability

Appearance

No marking defects

Capacitance

Change

R6, R7, C7, C8: Within

±12.5%

* LLL153C70G474: Within

±20%

D.F.

R6, R7, C7, C8: 0.2 max.

I.R.

Ω · F min.

Apply the rated voltage at 40

±2°C and 90 to 95% humidity for

500

±12 hours.

The charge/discharge current is less than 50mA.

Apply the rated DC voltage.

•Initial measurement

Perform a heat treatment at 150+0/–10

°C for one hour and

then let sit for 24

±2 hours at room temperature. Perform the

initial measurement.

•Measurement after test

Perform a heat treatment at 150+0/–10

°C for one hour and

then let sit for 24

±2 hours at room temperature, then measure.

High

Temperature

High

Humidity

(Steady

State)

Appearance

No marking defects

Capacitance

Change

R6, R7, C7, C8: Within

±12.5%

D.F.

R6, R7, C7, C8: 0.2 max.

I.R.

12.5

Ω · F min.

Fix the capacitor to the supporting jig in the same manner and

under the same conditions as (10).Perform the five cycles

according to the four heat treatments listed in the following

table. Let sit for 24

±2 hours at room temperature,

then measure.

• Initial measurement

Perform a heat treatment at 150+0/–10

°C for one hour and

then let sit for 24

±2 hours at room temperature. Perform the

initial measurement.

Temperature

Sudden

Change

Appearance

No marking defects

Capacitance

Change

R6, R7, C7, C8: Within

±12.5%

D.F.

R6, R7, C7, C8: 0.120 max.

I.R.

Ω · F min.

Dielectric

Strength

No failure

No.

Test Method

Specifications

Item

Continued from the preceding page.

LLL/LLR/LLA/LLM Series Specifications and Test Methods (2)

Step

Min. Operating

Temp. +0/–3

±3

Room

Temp.

2 to 3

Min. Operating

Temp. +0/–3

±3

Room

Temp.

2 to 3

Temp. (

°C)

Time (min.)

* LLR: This specification is only for LLR Type

!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.

0. Please check with our sales representatives or product engineers before ordering.

2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product

0. specifications before ordering.

LLL/LLR/LLA/LLM Series Specifications and Test Methods (2)

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1).

When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 88 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 88 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL