GRM552B11H102KA01D datasheet(129/221 Pages) MURATA

129 / 221 page

Continued from the preceding page.

Apply 150%*2 of the rated voltage for 1000

±12 hours at the

maximum operating temperature

±3°C. Let sit for 24±2 hours at

room temperature, then measure.

The charge/ discharge current is less than 50mA.

*2 GMD155 R6 1A 274 to 474 are applied to 120%.

• Initial measurement

Perform a heat treatment at 150+0/–10

°C for one hour and then

let sit for 24

±2 hours at room temperature. Perform the initial

measurement.

• Measurement after test

Perform a heat treatment at 150+0/–10

°C for one hour and then

let sit for 24

±2 hours at room temperature, then measure.

Durability

Appearance

No defects or abnormalities.

Capacitance

Change

R6 : Within

±12.5%

D.F.

R6 : 0.2 max.

I.R.

More than 25

Ω · F

Apply the rated voltage for 500

±12 hours at 40±2°C, in 90 to

95% humidity and set it for 24

±2 hours at room temperature,

then measure. The charge/discharge current is less than

50mA.

• Initial measurement

Perform a heat treatment at 150+0/–10

°C for one hour and then

let sit for 24

±2 hours at room temperature. Perform the initial

measurement.

• Measurement after test

Perform a heat treatment at 150+0/–10

°C for one hour and then

let sit for 24

±2 hours at room temperature, then measure.

High

Temperature

High

Humidity

(Steady)

Appearance

No defects or abnormalities.

Capacitance

Change

R6 : Within

±12.5%

D.F.

R6 : 0.2 max.

I.R.

More than 12.5

Ω · F

Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 14 are performed.

GMD Series Specifications and Test Methods (2)

No.

Test Method

Specifications

Item

Alumina substrate

Gold land

Alumina substrate

Capacitor

Die bond

Gold wire

Gold land

!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.

0. Please check with our sales representatives or product engineers before ordering.

2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product

0. specifications before ordering.

GMD Series Specifications and Test Methods (2)

127

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).

When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 129 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 129 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL