GRM552B11H102KA01D datasheet(186/221 Pages) MURATA

186 / 221 page

Only for Camera Flash Circuit Specifications and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35

D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Let the capacitor sit at 40

T2D and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24

T2 hrs. at room condition,* then

measure.

#Pretreatment

Perform a heat treatment at 150

W 0

Y10

D for 60T5 min. and then

let sit for 24

T2 hrs. at room condition.*

Humidity

(Steady

State)

Appearance

No marking defects

Capacitance

Change

Within

T15%

D.F.

0.05 max.

I.R.

U0.01µF: More than 10MΩ • µF

F0.01µF: More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24

T2 hrs. at room condition,* then measure.

#Pretreatment

Perform a heat treatment at 150

W 0

Y10

D for 60T5 min. and then

let sit for 24

T2 hrs. at room condition.*

Fig. 4

Temperature

Cycle

Appearance

No marking defects

Capacitance

Change

Within

T7.5%

D.F.

0.025 max.

I.R.

U0.01µF: More than 100MΩ • µF

F0.01µF: More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Preheat the capacitor at 120 to 150

D for 1 min.

Immerse the capacitor in solder solution at 260

T5D for 10T1

sec. Let sit at room condition* for 24

T2 hrs., then measure.

#Immersing speed: 25T2.5mm/s

#Pretreatment

Perform a heat treatment at 150

W 0

Y10

D for 60T5 min. and then

let sit for 24

T2 hrs. at room condition.*

Resistance

to Soldering

Heat

Appearance

No marking defects

Capacitance

Change

Within

T10%

D.F.

0.025 max.

I.R.

U0.01µF: More than 100MΩ • µF

F0.01µF: More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Solder resist

Glass Epoxy Board

100

φ4.5

t : 1.6

Capacitance meter

Flexure=1

(in mm)

20 50

R230

Pressurizing

speed: 1.0mm/s

Pressurize

Step

Temperature (

Min. Operating Temp.

Room Temp.

Max. Operating Temp.

Room Temp.

Time (min.)

2 to 3

(mm)

Dimension (mm)

1.2

2.2

4.0

5.0

1.65

2.0

1.0

2.0

Z1.25

3.2

Z1.6

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2

T0.5 sec.

Immersing speed: 25

T2.5mm/s

Temp. of solder: 245

T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235

T5°C H60A or H63A Eutectic Solder

Solderability of

Termination

75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 3

Deflection

No marking defects

Fig. 2

No.

Test Method

Specifications

Item

GR7 Series Specifications and Test Methods

185

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 186 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 186 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL