AX58200 datasheet(68/180 Pages) ASIX

68 / 180 page

AX58200

EtherCAT Slave Controller SoC

2.11.2 Features

⚫

Supports real time counter in RTC_TIME (hour, minute, second) and calendar counter in

RTC_CAL (year, month, day) for RTC time and calendar check.

⚫

Supports alarm time (hour, minute, second) and calendar (year, month, day) settings in

RTC_TALM and RTC_CALM.

⚫

Supports alarm time (hour, minute, second) and calendar (year, month, day) mask enable in

RTC_TAMSK and RTC_CAMSK.

⚫

Selectable 12-hour or 24-hour time scale in RTC_CLKFMT register.

⚫

Supports Leap Year indication in RTC_LEAPYEAR register.

⚫

Supports Day of the Week counter in RTC_WEEKDAY register.

⚫

Frequency of RTC clock source compensate by RTC_FREQADJ register.

⚫

All time and calendar message expressed in BCD format.

⚫

Supports periodic RTC Time Tick interrupt with 8 period interval options 1/128, 1/64, 1/32, 1/16,

1/8, 1/4, 1/2 and 1 second.

⚫

Supports RTC Time Tick and Alarm Match interrupt.

⚫

Supports 1 Hz clock output.

⚫

Supports chip wake-up from Idle or Power-down mode while a RTC interrupt signal is generated.

⚫

Supports Daylight Saving Time software control in RTC_DSTCTL.

⚫

Supports up 3 pairs dynamic loop tamper pin or 6 individual tamper pin.

⚫

Supports 80 bytes spare registers and tamper pins detection to clear the content of these spare

registers.

AX58200 Datasheet(PDF) 68 Page - ASIX Electronics Corporation