| Electronic Components Datasheet Search |
|
48SWTQFN-EP Datasheet(PDF) 80 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
48SWTQFN-EP Datasheet(HTML) 80 Page - Maxim Integrated Products |
|
80 / 103 page ![]() MAX9288/MAX9290 3.12Gbps GMSL Deserializers for Coax or STP Input and MIPI CSI-2 Output www.maximintegrated.com Maxim Integrated │ 80 Table 20. HDCP Authentication and Normal Operation (One Repeater, Two µCs)—First and Second Parts of the HDCP Authentication Protocol (continued) NO. µC_B µC_R HDCP GMSL SERIALIZER (TX_B1, TX_R1, TX_R2) HDCP GMSL DESERIALIZER (RX_R1, RX_D1, RX_D2) TX_B1 CDS = 0 TX_R1 CDS = 0 TX_R2 CDS = 0 RX_R1 CDS = 1 RX_D1 CDS = 0 RX_D2 CDS = 0 5 Reads the locked bit of RX_R1 and makes sure the link between TX_B1 and RX_R1 is established. Reads the locked bit of RX_D1 and makes sure the link between TX_R1 and RX_D1 is established. Reads the locked bit of RX_D2 and makes sure the link between TX_R2 and RX_D2 is established. — — 6 Optionally, writes a random number seed to TX_B1. Writes 1 to the GPIO_0_FUNCTION and GPIO_1_FUNCTION bits in RX_R1 to change GPIO functionality used for HDCP purpose. Optionally, writes a random-number seed to TX_R1 and TX_R2. — — 7 Starts and completes the first part of the authentication protocol between TX_B1, RX_R1 (see steps 6–10 in Table 17). — TX_B1: According to commands from µC_B, generates AN, computes R0. RX_R1: According to commands from µC_B, computes R0’. 8 — When GPIO_1 = 1 is detected, starts and completes the first part of the authentication protocol between the (TX_R1, RX_D1) and (TX_R2, RX_D2) links (see steps 6–10 in Table 17). TX_R1, TX_R2: According to commands from µC_R, generates AN, computes R0. RX_D1, RX_D2: According to commands from µC_R, computes R0’. 9 Waits for the VSYNC falling edge and then enables encryption on the (TX_B1, RX_R1) link. Full authentication is not complete yet so it makes sure A/V content that needs protection is not transmitted. Since REPEATER = 1 was read from RX_R1, the second part of authentication is required. — TX_B1: Encryption enabled after next VSYNC falling edge. RX_R1: Decryption enabled after next VSYNC falling edge. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |