| Electronic Components Datasheet Search |
|
6402 Datasheet(PDF) 37 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
6402 Datasheet(HTML) 37 Page - Intel Corporation |
|
37 / 250 page ![]() Intel® 6400/6402 Advanced Memory Buffer Datasheet 37 Electrical, Power, and Thermal 4 Electrical, Power, and Thermal This chapter contains a description of the Intel 6400/6402 Advanced Memory Buffer (AMB)’s electrical DC parameters, timing parameters, power considerations, and thermal considerations. 4.1 Electrical DC Parameters 4.1.1 Absolute Maximum Ratings Table 4-1 contains absolute maximum ratings over operating free-air temperature range (see Note 1). Notes: 1. Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.This value is limited to 2.3 V maximum. 4.1.2 Operating DC Parameters Table 4-2 contains the electrical DC parameters for the AMB part for normal operation. Note: There will also be a VTT termination supply at VDDR/2 available on the DIMM but does not connect to the AMB. Table 4-1. Absolute Maximum Ratings Over Operating Free-Air Temperature Range (See Note 1) Symbol Parameter Min Max Unit VDD Supply voltage DRAM Interface –0.5 +2.3 V VIN (DDR2), VOUT (DDR2) Voltage on any DDR2 interface pin relative to Vss (See Notes 2 and 3) –0.5 +2.3 V IINK (VIN < 0 or VIN > VDD) Input clamp current +30 mA IOUTK (VOUT < 0 or VOUT > VDD) Output clamp current +30 mA IOUT (VOUT = 0 to VDD) Continuous output current +30 mA N/A Continuous current through each VDD or GND +100 mA VCC Supply voltage for Core and High Speed Interface –0.3 +1.75 V Tstg Storage temperature range –55 +100 °C Table 4-2. AMB Operating DC Electrical Parameters Parameter AMB Mode Units Min Typ Max VCC link / core Volts 1.455 1.5 1.575 VDD Volts 1.7 1.8 1.9 VDDSPD Volts 3.0 3.3 3.6 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |