GRM552B11H102KA01D datasheet(118/221 Pages) MURATA

118 / 221 page

Continued from the preceding page.

A voltage treatment should be given to the capacitor, in which a

DC voltage of 200% the rated voltage is applied for one hour at

the maximum operating temperature;

±3°C then it should be set

for 24

±2 hours at room temperature and the initial measurement

should be conducted.

Then apply the above mentioned voltage continuously for

1000

±12 hours at the same temperature, remove it from the

bath, and set it for 24

±2 hours at room temperature, then

measure. The charge/discharge current is less than 50mA.

High

Temperature

Load

Appearance

No defects or abnormalities

Capacitance

Change

R7: Within

±12.5%

D.F.

R7: W.V.: 10V min.; 0.05 max.

I.R.

More than 1,000M

Ω or 50ΩF

(whichever is smaller)

Apply the rated voltage for 500

±12 hours at 40±2°C, in 90 to

95% humidity and set it for 24

±2 hours at room temperature,

then measure. The charge/discharge current is less than 50mA.

Humidity

Load

Appearance

No defects or abnormalities

Capacitance

Change

R7: Within

±12.5%

D.F.

R7: W.V.: 10V min.; 0.05 max.

I.R.

More than 500M

Ω or 25ΩF

(whichever is smaller)

Set the capacitor for 500

±12 hours at 40±2°C, in 90 to 95%

humidity.

Take it out and set it for 24

±2 hours at room temperature, then

measure.

Humidity

(Steady State)

Appearance

No defects or abnormalities

Capacitance

Change

R7: Within

±12.5%

D.F.

R7: W.V.: 10V min.; 0.05 max.

I.R.

More than 1,000M

Ω or 50ΩF

(whichever is smaller)

Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 15 are performed.

GMA Series Specifications and Test Methods (1)

Alumina substrate

Gold land

Alumina substrate

Capacitor

Die bond

Gold wire

Gold land

No.

Test Method

Specifications

Item

!Note 1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.

0. Please check with our sales representatives or product engineers before ordering.

2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product

0. specifications before ordering.

GMA Series Specifications and Test Methods (1)

116

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).

When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 118 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 118 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL