GRM552B11H102KA01D datasheet(150/221 Pages) MURATA

150 / 221 page

Notice

1. Please evaluate a capacitor by actual cleaning equipment

and conditions to confirm the quality and select the

applicable solvent.

2. Unsuitable cleaning solvent may leave residual flux or

other foreign substances, causing deterioration of

electrical characteristics and the reliability of the

capacitors.

3. Select the proper cleaning conditions.

3-1. Improper cleaning conditions (excessive or

insufficient) may result in the deterioration of the

performance of the capacitors.

6. Washing

Continued from the preceding page.

4. Flux Application

1. An excessive amount of flux generates a large quantity of

flux gas, which can cause a deterioration of Solderability.

Therefore apply flux thinly and evenly throughout. (A

foaming system is generally used for flow soldering.)

2. Flux containing too high a percentage of halide may

cause corrosion of the outer electrodes unless there is

sufficient cleaning. Use flux with a halide content of 0.2%

max.

3. Do not use strong acidic flux.

4. Do not use water-soluble *flux.

(*Water-soluble flux can be defined as non rosin type flux

including wash-type flux and non-wash-type flux.)

3. Adhesive Curing

1. Insufficient curing of the adhesive can cause chips to

disconnect during flow soldering and deterioration in the

insulation resistance between the outer electrodes due to

moisture absorption.

Control curing temperature and time in order to prevent

insufficient hardening.

Continued on the following page.

o Set temperature and time to ensure that leaching of the

outer electrode does not exceed 25% of the chip end

area as a single chip (full length of the edge A-B-C-D

shown right) and 25% of the length A-B shown below as

mounted on substrate.

[As a Single Chip]

[As Mounted on Substrate]

5. Flow Soldering

Outer Electrode

Notice

148

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 150 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 150 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL